All of the following chapters assume that you have a properly configured Just In setup. If this is not the case, please refer to the particular Just In documentation.
Live Cut Projects
Creating a Live Cut Project
- Open Just In.
- Select the desired Channels for your Live Cut Project and open the Inspector. You need to select at least two Channels.
- Select a Timecode Source, a Capture Preset and a Destination Preset. It is mandatory that these attributes are synchronized for all Channels used with Live Cut.
- Go to the menu Channel → New Live Cut Project.
- Enter a Name, Scene and Take for the Live Cut Project. Project Template is not required at this time. Press the Create button when you are done.
- If everything went okay the Live Cut Interface will be shown.
Closing a Live Cut Project
- Go to the menu Project → Close Project.
- The Live Cut Project will be closed immediately and the Just In User Interface appears again.
Opening a saved Live Cut Project
- Open the folder ~/Documents/LiveCut Documents/Projects and double click the Project file you want to open.
- Live Cut opens the Project and displays an already filled EDL. You may export the Project again by using the menu Project → Export to …
Exporting a Live Cut Project
You may reopen Live Cut Projects at any time after the end of your recording session and re-export the Project with a different settings – if you wish.
- Make sure you are in a Live Cut Project. To open a previously saved Live Cut Project refer to the instructions above.
- If desired change the Project/Export settings.
- Use the menu Project → Export to …
Live Cut Project Templates
Creating a Live Cut Project Template
- Make sure your are in a Live Cut Project. To open a previously saved Live Cut Project refer to the instructions above.
- Go to the menu Project → Create Template.
- Enter a Template name and press the Save button.
Using a Live Cut Project Template
- Go to the menu Channel → New Live Cut Project.
- Select your Project Template from the drop-down menu.
Removing a Live Cut Project Template
- Make sure that Live Cut is currently not using the Project Template you want to delete.
- In the Finder go to your User folder.
- Open the folder ~/Documents/LiveCut Documents/Project Templates.
- Delete the desired Project Template.
Starting a Multicam Recording
Before starting a Multicam Recording you must ensure that your Live Cut Project Settings are configured properly. Refer to the chapter Project Settings.
If you have already configured the Project Settings you can head straight to the chapter Starting a Multicam Recording.