Release Notes Playout Pro v.2026.x

Just Playout 2026.1.0.GM.1555 Release Notes

• This version includes Composition Builder 2026.0.0.GM.362. Please refer to separate release notes.

• The Swagger REST documentation page is now sorted alphabetically by end-point.

Just Playout 2026.1.0.B1.1554 Release Notes

• This version includes Composition Builder 2026.0.0.GM.361. Please refer to separate release notes.

• When configuring an "empty" multi-viewer, the channel connection menu no longer contains any inactive channels, as connecting to an inactive channel isn't possible.

• The "Device" tab in the configuration panel now has a "Configure REST" button instead of "Open REST API" and "Install Self-Signed Certificate" buttons. These buttons are now contained in a separate panel displayed by clicking "Configure REST".
• The REST API server port can now be changed in the "Configure REST" panel, or set to 0 to disable the REST server completely if desired.
• The channel preview is now automatically started without requiring Just Control to connect to the channel, allowing "headless" integration without the need to run Just Control.

Just Playout 2026.1.0.B1.1553 Release Notes

• This version includes Composition Builder 2026.0.0.GM.361. Please refer to separate release notes.

• Fixed unexpected artefacts rendering interlaced video and FX.

Just Playout 2026.1.0.B1.1552 Release Notes

• This version includes Composition Builder 2026.0.0.GM.360. Please refer to separate release notes.

• Improved performance and stability using AJA devices, particularly under heavy loads.

• Improved compatibility with HTTP/1.1 keep-alive connections using the REST API.
• The REST API now supports https:// connections in addition http://. If there is a certificate installed at ~/Library/Application Support/ToolsOnAir/certs/server.p12, then it will be used and the REST server will only accept https:// connections. If there is no certificate installed, the REST server will only accept http:// connections. If there is currently no certificate installed, the configuration panel now has an additional "Install Self-Signed Certificate (HTTPS)" button that will install a default self-signed certificate on the local system. Note that most modern browsers will show a security alert when using such a certificate and ask you to accept the certificate before connecting.

Just Playout 2026.1.0.B1.1551 Release Notes

• This version includes Composition Builder 2026.0.0.GM.359. Please refer to separate release notes.

• Updated the AJA drivers to v18.0, if you are using an AJA device please update your system to this version before using this version.

• Fixed a crash saving a full TOA System Profile with the “Include Apple System Profile” option selected if the system is running security software such as Jamf.

Just Playout 2026.1.0.B1.1550 Release Notes

• This version includes Composition Builder 2026.0.0.GM.359. Please refer to separate release notes.

• Enabled RGBA output for UHD formats.
• Fixed a bug that resulted in the delete key failing to delete items from the timeline in Just Live’s scheduling tab after using the live preview buttons to play, cue or pause an item.
• Fixed a bug that resulted in HTML infinite FX not being loaded/displayed after a restart of Just Out.
• Fixed the App name used in the warning alert if AJA or Blackmagic was selected as the input or output device without a device attached.
• Added a new “Start Preview Of Selected Item” to Just Live’s scheduling tab’s “View” menu with the cmd-shift-P keyboard shortcut. If an item is selected in the workbench and therefore loading in the preview, use this menu item or keyboard shortcut to start playing the preview.
• Fixed a bug that resulted in unexpected behaviour after using the “jump to next” command if there were “locked” playlists in the schedule. Now, items are only re-scheduled to reflect the jump up to, but not including any locked playlists. Any locked playlist, and any successive playlists, remain unchanged.
• Fixed a bug that resulted in the fade in/out properties for a scheduled live input event being ignored.

Just Playout 2026.0.0.GM.1542 Release Notes

• This version includes Composition Builder 2026.0.0.GM.358. Please refer to separate release notes.

• Initial 2026.0 release.

Just Playout 2026.0.0.GM.1541 Release Notes

• This version includes Composition Builder 2026.0.0.GM.358. Please refer to separate release notes.

• Fixed user interface glitches running on macOS 26 Tahoe.

Just Playout 2026.0.0.GM.1540 Release Notes

• This version includes Composition Builder 2026.0.0.GM.358. Please refer to separate release notes.

• Updated to NDI v6.3.2 for improved performance and stability when using NDI.

• Fixed a bug that resulted in CEF HTML rendering failing to render when running multiple Just Outs on the same system (Just Out, Just Out 2, Just Out 3, Just Out 4).

Just Playout 2026.0.0.GM.1539 Release Notes

• This version includes Composition Builder 2026.0.0.GM.358. Please refer to separate release notes.

• When monitoring closed captions in the preview, CEA708 captions are now also supported. If the stream includes both CEA608 and 708 captions, then the 708 captions are preferred.
• When a video finishes, the VANC data sent to clear any captions/subtitles now also includes CEA708 in addition to CEA608 and OP-47 teletext. Previously, if the video contained CEA708 captions then the downstream decoder may not have cleared the captions.
• When hiding or showing the primary video track (e.g. “emergency live input”), VANC data is sent to clear any captions/subtitles that may have been on-air.

Just Playout 2026.0.0.GM.1538 Release Notes

• This version includes Composition Builder 2026.0.0.GM.358. Please refer to separate release notes.

• Fixed a bug that resulted in the backup Just Out engine not restarting after stopping and starting a channel configured for full redundancy.
• When running Just Out 2, 3 or 4 for multi-channel playout on a single system, various windows, menus and alters now display the correct App name such as “Just Out 2” instead of simply “Just Out”.

Just Playout 2026.0.0.GM.1537 Release Notes

• This version includes Composition Builder 2026.0.0.GM.357. Please refer to separate release notes.

• Internal build.

Just Playout 2026.0.0.GM.1536 Release Notes

• This version includes Composition Builder 2026.0.0.GM.357. Please refer to separate release notes.

• When selecting a video on a Just Live channel, the “Loop” checkbox in the inspector is now only shown if the video’s timebase matches the channel’s (for example i25 or p50). If you need to loop video in Just Live, please ensure that your video’s timebase matches the channel.

Just Playout 2026.0.0.B1.1535 Release Notes

• This version includes Composition Builder 2026.0.0.GM.357. Please refer to separate release notes.

• Added Just Out 2, Just Out 3 and Just Out 4 Apps to the Stay Alive Apps in the ToolsOnAir System Preferences pane.

Just Playout 2026.0.0.B1.1534 Release Notes

• This version includes Composition Builder 2026.0.0.GM.357. Please refer to separate release notes.

• Fixed a crash clicking “Ok” on the video trimmer if the video’s timebase didn’t match the channel’s timebase (e.g. p50 on an i25 channel).
• Fixed a bug that resulted in unexpected behaviour after selecting a specific poster frame for a video if the video’s timebase didn’t match the channel’s timebase (e.g. p50 on an i25 channel).

Just Playout 2026.0.0.B1.1533 Release Notes

• This version includes Composition Builder 2026.0.0.GM.357. Please refer to separate release notes.

• Updated Blackmagic Decklink drivers to Desktop Video 16.0. If you are using a Decklink device, please update your system to this version.

Just Playout 2026.0.0.B1.1532 Release Notes

• This version includes Composition Builder 2026.0.0.GM.356. Please refer to separate release notes.

• When configuring an “empty” viewer to display a web page, the “title” field is now disabled as web pages do not support titles.
• Fixed a bug that resulted in unexpected behaviour or crashes if a SRT or UDP live input sent video in a non-broadcast-standard resolution.

Just Playout 2026.0.0.B1.1531 Release Notes

• This version includes Composition Builder 2026.0.0.GM.355. Please refer to separate release notes.

• Renamed “Empty Viewer” to “Viewer Settings” when selecting an “empty” view in the sense that it isn’t connected to a specific channel.
• In the viewer settings for an “empty” viewer, there is now an additional “Title” field that allows you to enter an optional title for the viewer. If defined, the label is shown in the viewer’s “toolbar” as the channel name is shown when the viewer is connected to a specific channel.

Just Playout 2026.0.0.B1.1530 Release Notes

• This version includes Composition Builder 2026.0.0.GM.355. Please refer to separate release notes.

• Internal build.

Just Playout 2026.0.0.B1.1529 Release Notes

• This version includes Composition Builder 2026.0.0.GM.354. Please refer to separate release notes.

• When assigning an image to an “empty” viewer in the multi-viewer, the image is now “clipped” to the viewer’s size depending on the scaling selected. For example, “Resize Aspect Fill” will ensure that the aspect is preserved while filling the available viewer area, but now without exceeding the bounds of the viewer.
• When selecting an empty viewer in the multi-viewer, there is a new “Channel Preview” option that allows you to display a channel’s preview in the viewer, including a channel’s live input if enabled for the channel. This allows you to monitor the channel’s live input in the multi-viewer even if the live input is not currently on-air, or the channel’s backup engine’s output if redundant playout is enabled for the channel. Both can be useful for confidence monitoring during playout.

Just Playout 2026.0.0.B1.1528 Release Notes

• This version includes Composition Builder 2026.0.0.GM.354. Please refer to separate release notes.

• The new preview port fields in the engine settings are now correctly disabled when viewing the engine’s properties while the channel is running.
• The new “Show All Ports” window now additionally marks any potential port conflicts red, and an additional tooltip shows extended information about the conflict.
• Fixed a configuration issue on some Blackmagic devices after updating a channel from a previous version with live input enabled.

Just Playout 2026.0.0.B1.1527 Release Notes

• This version includes Composition Builder 2026.0.0.GM.354. Please refer to separate release notes.

• When configuring an engine’s preview settings, there is an additional “Medium” selection in addition to “Low” and “High” for the “resolution”.
• Fixed a bug that ignored the “resolution” preview engine setting and always sent a high-quality preview.
• When configuring an engine’s preview settings, there are additional fields to change the ports used to send the preview and (if enabled for the channel) the live input preview.
• In the configuration panel there is a new “Show All Ports” button that displays a list of all ports used by the device, channels and engines. This can be useful to identify possible conflicts, and for system administrators for networks with a firewall to ensure that all ports are open on the network.
• Updated the “TOA Template Package ReadMe” link in the DMG for the 2026 release.

Just Playout 2026.0.0.B1.1526 Release Notes

• This version includes Composition Builder 2026.0.0.GM.354. Please refer to separate release notes.

• Updated Blackmagic ATEM drivers to 10.2.1. If you are using an ATEM device, please install ATEM Switchers 10.2.1 update.

Just Playout 2026.0.0.B1.1525 Release Notes

• This version includes Composition Builder 2026.0.0.GM.353. Please refer to separate release notes.

• Fixed a bug that resulted in a configuration error and Just Out not starting when RTMP output was selected for the channel.

Just Playout 2026.0.0.B1.1524 Release Notes

• This version includes Composition Builder 2026.0.0.GM.353. Please refer to separate release notes.

• Fixed a crash when HLS File was selected as the output.

Just Playout 2026.0.0.B1.1523 Release Notes

• This version includes Composition Builder 2026.0.0.GM.353. Please refer to separate release notes.

• Channels in the “Just Connect Status” window are now sorted alphabetically.

Just Playout 2026.0.0.B1.1522 Release Notes

• This version includes Composition Builder 2026.0.0.GM.353. Please refer to separate release notes.

• Channels in the “Connections” tab in the multi-viewer inspector and in the configuration panel are now sorted alphabetically.

Just Playout 2026.0.0.B1.1521 Release Notes

• This version includes Composition Builder 2026.0.0.GM.353. Please refer to separate release notes.

• NDI input and output streams now use floating point audio processing for the best possible audio quality in professional environments.

Just Playout 2026.0.0.A1.1520 Release Notes

• This version includes Composition Builder 2026.0.0.GM.353. Please refer to separate release notes.

• Fixed an issue that resulted in the new skip or move to an item in the playlist failing on longer playlists if the selected item was towards the end of the playlist.
• Fixed an issue that could result in dropped frames using the new skip or move to an item in the playlist.
• Improved user interface performance.

Just Playout 2026.0.0.A1.1519 Release Notes

• This version includes Composition Builder 2026.0.0.GM.352. Please refer to separate release notes.

• Fixed an issue that resulted in fewer inputs or outputs being shown as available for Blackmagic devices with multiple I/O ports.
• The live preview viewer in Just Play’s scheduling tab now has 3 action buttons. In addition to the existing “jump to next” button, the new buttons allow you to starting playing any selected item in the current playlist immediately. One button moves the selected item in the playlist to make it the next item, and then plays it immediately. The other button deletes all items in the playlist between the currently playing item and the selected item, making the selected item the next item in the playlist, and then plays it immediately.

Just Playout 2026.0.0.A1.1518 Release Notes

• This version includes Composition Builder 2026.0.0.GM.352. Please refer to separate release notes.

• Updated icons for macOS 26 Tahoe.

Just Playout 2026.0.0.A1.1517 Release Notes

• This version includes Composition Builder 2026.0.0.GM.351. Please refer to separate release notes.

• Improved performance and reliability using NDI output, particularly for higher frame-rates e.g p50, p59.94.
• Fixed a bug that resulted in unexpected behaviour after selecting a different input or output port for an AJA device.

Just Playout 2026.0.0.A1.1516 Release Notes

• This version includes Composition Builder 2026.0.0.GM.351. Please refer to separate release notes.
• Fixed user interface glitches running on macOS 26 Tahoe.

• Improved detection of VANC metadata in NDI live input streams.
• Fixed a bug after logging out the current user or disconnecting and resetting the multi-viewer layout with an empty viewer showing a web page resulted in the web page still being visible.
• If an empty viewer is selected in the multi-viewer when logging out the current user, the inspector is now correctly closed and the viewer de-selected.
• Fixed a bug that sometimes resulted in an empty viewer displaying a web page showing the page with the wrong size for the given viewer.
• When using the “Import Rundown” feature, fixed a bug that resulted in the import failing if the selected day or days were “empty” (e.g. in the future and never selected or displayed in Just Control).
• Fixed unexpected behaviour selecting a Blackmagic device as the input or output although no devices were found on the system running Just Out. Now, an alert is displayed describing the issue.
• Fixed a bug after selecting a different input or output port for an AJA device that resulted in the change being ignored and the original (default) port being used for the input or output.

Just Playout 2026.0.0.A1.1515 Release Notes

• This version includes Composition Builder 2026.0.0.GM.351. Please refer to separate release notes.
• It is now possible to select an “empty” multi-viewer viewer when it is configured to show a web page, and the selected viewer also shows the usual selection border.
• Fixed minor UI glitches in the “empty viewer” inspector group running on macOS 26.

Just Playout 2026.0.0.A1.1514 Release Notes

• This version includes Composition Builder 2026.0.0.GM.351. Please refer to separate release notes.
• Fixed an interface glitch in the “User Interfaces” group in the channel’s inspector.
• Fixed a bug that displayed the wrong number of minutes in a “time until date” timer in the multi-viewer if the time was more than an hour.
• When using dual-timecode display in the viewer, the secondary timecode display now also uses the correct “:” or “;” separator between seconds and frames depending on whether the channel is using drop-frame timecode.
• When configuring an empty viewer in the multi-viewer, there is an additional option to display a web page by entering the URL address.
• When selecting an empty viewer in the multi-viewer, the inspector now automatically opens if closed, and shows the “Settings” tab to ensure that the options for configuring the empty viewer are automatically visible.

Just Playout 2026.0.0.A1.1513 Release Notes

• This version includes Composition Builder 2026.0.0.GM.350. Please refer to separate release notes.
• The viewer background (and the “grid” when creating a new multi-viewer layer) is now more visible on all versions of macOS, particularly macOS 26 with certain appearance settings.
• When the multi-viewer tabs are empty (e.g. “Settings”, “Connections”, “Markers”), the icon displayed in the tab is now more visible on all versions of macOS, particularly macOS 26 with certain appearance settings.

Just Playout 2026.0.0.A1.1512 Release Notes

• This version includes Composition Builder 2026.0.0.GM.349. Please refer to separate release notes.
• Fixed multiple issues and user interface glitches running on macOS 26 Tahoe.
• Fixed an issue using RGBA fill+key SDI output with Blackmagic or AJA where the key was always white.
• In the App’s Just Live settings, items in the “Default next action for graphics” are disabled if not applicable to graphics (some are only available for videos).
• For Just Live channels, it is now possible to select and delete multiple folders at the same time. Note that the workbench can only display the contents of a single folder, so if more than one folder is selected, the workbench is shown empty.
• For Just Live channels, if a folder has both the “Playlist” and “Locked” properties selected, the button shown in the folder table is the playlist and not the locked button as a locked playlist folder can still be played.
• Fixed a bug after adding a new engine to a channel that resulted in the engine’s input and/or output not being configurable.
• If the multi-viewer has empty viewers (not connected to any channel), selecting a viewer now displays configuration options in the inspector. These options include showing a clock with the current time, an image or various timers (countdown, stopwatch, time until a certain time in the future). In addition, you can select a currently disconnected channel to show it in the empty viewer.

Just Playout 2026.0.0.A1.1511 Release Notes

• This version includes Composition Builder 2026.0.0.GM.348. Please refer to separate release notes.
• Improvements when decoding and displaying closed captions.

Just Playout 2026.0.0.A1.1510 Release Notes

• This version includes Composition Builder 2026.0.0.GM.348. Please refer to separate release notes.
• Fixed a bug that resulted in black output instead of the live input after hiding the video track whilst playing out a video.
• Fixed a bug that resulted in Just Out “stalling” or “freezing” requiring a “Force Quit” when quitting or restarting if the channel was configured to use NDI live input and the NDI source was available but then went offline before quitting Just Out.
• All timecode overlays now correctly use “;” instead of a “:” between the second and frames for drop-frame timecode.
• For live channels, the view menu in the scheduling tab has 4 additional menu items: “Load Selected Item”, “Load And Cue Selected Item”, “Load And Play Selected Item” and “Clear, Load And Play Selected Item”. These correspond to the “double-click” options available in the App settings, but they are now always accessible via the menu or keyboard shortcut. In each case, first select one item in the workbench and then either the menu item or the keyboard shortcut. In combination with the cursor keys, these actions allow for quick keyboard-only operation.

Just Playout 2026.0.0.A1.1509 Release Notes

• This version includes Composition Builder 2026.0.0.GM.347. Please refer to separate release notes.
• Fixed a bug that resulted in a channel configured with live input default pass-through always passing any VANC data from the live input to the output, even if video was being played over the live input.
• With a multi-channel setup, the TOA System Profile now includes the logs from each engine with the name “<Channel Name> <Engine Name>.zip” to prevent naming conflicts if, for example, all of the channels had an engine with the same name e.g. “Primary”. This ensures that the System Profile includes all of the logs from all of the engines on all of the channels.

Just Playout 2026.0.0.A1.1508 Release Notes

• This version includes Composition Builder 2026.0.0.GM.347. Please refer to separate release notes.
• Fixed a bug that resulted in unexpected behaviour if the selected device was connected to the system but unavailable (e.g. in use by another App). Specifically, no error was displayed, but the output did not start correctly and quitting Just Out resulted in a stall requiring a force quit. Now, if the device isn’t available, Just Out will continuously restart itself until the device becomes available.
• When a video with OP-47 subtitles finishes playing out (either scheduled or using jump to next), the subtitles are now cleared to prevent subtitles remaining on air until another video with subtitles is played out.
• Any outgoing SCTE-104 VANC messages are now logged in the channel’s “Messages” inspector group. Hovering over the message in the inspector will display a tooltip with more information about the specific SCTE-104 message.

Just Playout 2026.0.0.A1.1507 Release Notes

• This version includes Composition Builder 2026.0.0.GM.347. Please refer to separate release notes.
• Fixed a bug that resulted in a scheduled live input event only having audio and no video on the output.
• When a video with CEA closed captions finishes playing out (either scheduled or using jump to next), the closed captions are now cleared to prevent captions remaining on air until another video with captions is played out.
• If a video with OP-47 teletext subtitles is played out (or a live input event with OP-47 subtitles on the input), the live preview now shows the subtitles if enabled.

Just Playout 2026.0.0.A1.1506 Release Notes

• This version includes Composition Builder 2026.0.0.GM.347. Please refer to separate release notes.
• Fixed a bug that prevented channels with SDI (AJA or Blackmagic) configured for RGBA fill+key output correctly outputting a key signal on the output adjacent to the fill output.
• Fixed a bug that resulted in a channel configured with live input default pass-through always passing any VANC data from the live input to the output, even if video was being played over the live input.

Just Playout 2026.0.0.A1.1505 Release Notes

• This version includes Composition Builder 2026.0.0.GM.347. Please refer to separate release notes.
• The “Audio Monitor” multi-viewer inspector group has been renamed “Preview Monitor” and now has an additional checkbox to enable monitoring of closed captioning. When enabled, if the output signal (or if the live input is currently on-air, the input signal) includes CEA608 or 708 VANC captioning, the live preview will overlay the captions. Additionally there is a “Show Captions” menu item in the “View” menu in the scheduling tab for each channel.
• The AJA device selection popup menu is now disabled if the configuration panel is currently locked or the channel is active.
• When adding a channel to an existing setup in the configuration panel, the setup wizard now finishes correctly once the channel has been created.
• When adding a channel to an existing setup in the configuration panel, the multi-channel options are now disabled as they are currently only available when setting up a new, clean system. If you already have channels and wish to switch to a multi-output setup (more than one Just Out running on the same system), please use the ToolsOnAir Uninstaller first to start with a clean system.
• Fixed a crash starting Just Out if the port used to send the live preview was already in use.
• Fixed a bug that resulted in unexpected behaviour if your system had two or more Blackmagic devices attached.

Just Playout 2026.0.0.A1.1504 Release Notes

• This version includes Composition Builder 2026.0.0.GM.346. Please refer to separate release notes.
• Each instance of Just Out (Just Out 2, Just Out 3, Just Out 4) now produces a separate log file instead of all sharing a single log file.
• Removed an unnecessary “Notification” alert once per day related to the license check.
• Updated the icons for Just Out 2, Just Out 3 and Just Out 4 to make the number more prominent.
• Updated the license watermark “blips” shown when a channel isn’t licensed to make it more apparent that the watermark is related to an unlicensed channel.
• Fixed a bug that resulted in any VANC data from the live input being passed through to the output even if the live input wasn’t currently active/visible.
• If you have a valid license with the end of maintenance date set, this is now displayed in the “Activation” tab in the configuration panel.

Just Playout 2026.0.0.A1.1503 Release Notes

• This version includes Composition Builder 2026.0.0.GM.345. Please refer to separate release notes.
• Fixed a crash after selecting an AJA device for output.
• Fixed a bug that resulted in a channel from v2025.4 configured to use AJA or Blackmagic devices for input or output reporting missing video device after updating to this version.
• When configuring a new system, if you select a multi-channel setup the option to use AJA devices is now disabled as AJA devices are currently only supported for single channel setups.

Just Playout 2026.0.0.A1.1502 Release Notes

• This version includes Composition Builder 2026.0.0.GM.345. Please refer to separate release notes.
• Updated all DMG and in-App links for the 2026 release.
• The “Just Out 2”, “Just Out 3” and “Just Out 4” Apps now have different icons with “2”, “3” and “4” included to make it easier to identify the different Apps in the Dock and/or App Switcher.

Just Playout 2026.0.0.A1.1501 Release Notes

• This version includes Composition Builder 2026.0.0.GM.345. Please refer to separate release notes.
• Fixed a crash in Just Out if an AJA device was attached to the system.
• Fixed a bug where stopping and re-starting a channel using a Blackmagic device resulted in the channel not starting correctly and “freezing”, requiring a “Force Quit” of Just Out.
• Removed duplicate channel settings groups in the multi-view inspector that are now found in the scheduling tab inspector.
• When configuring an engine to use AJA or Blackmagic hardware, there are new UI controls showing the actual devices found on the system, allowing you to choose the exact input and/or output port to use for the channel. Note that devices can only be shown once Just Out has been started once. If Just Out has not yet been started, or if no relevant devices were found on the system, a relevant warning is displayed.
• After installation, the “/Applications/Just Playout” folder now contains three additional Apps, “Just Out 2”, “Just Out 3” and “Just Out 4”. In combination with “Just Out”, this allows you to start up to 4 Just Out engines on the same system for multi-channel operation.
• Changed the default port used to send the preview from 8554 to 8590 to prevent collisions with some RTC/WebRTC services.
• When configuring a new system, the setup wizard has an additional popup menu allowing you to set up a single channel system, or a multi-channel system with 2, 3 or 4 channels. Note that AJA hardware is not currently supported for multi-channel setups.

Just Playout 2026.6.0.A1.1500 Release Notes

• This version includes Composition Builder 2026.0.0.GM.344. Please refer to separate release notes.
• Updated to NDI v6.3 for improved performance and stability when using NDI.
• Video and SimpleFX layers have a clickable “visibility” button in the timeline as was previously already the case for FX layers. Clicking on the button toggles the visibility on and off, or, in addition there is a new “Toggle Visible Layers” menu in the “View” menu with menu items for the individual layers. Finally, these menu items have keyboard shortcuts allowing quick toggling of layer visibility using the keyboard.
• If the engine is configured for live input, hiding the video layer automatically shows the live input. This can be used as an “emergency broadcast” or “breaking news” feature, allowing instant switching from the current schedule to live input and back. Note that scheduled items are never altered by this action, so some items may never be played out at all. For example, if you hide the video layer for 30 minutes in order to show the live input, anything previously scheduled for those 30 minutes will never be played out.

Just Playout 2025.4.1.GM.1466 Release Notes

• This version includes Composition Builder 2025.4.0.GM.343. Please refer to separate release notes.
• Fixed unexpected behaviour for a text scroller with the repeat mode set to “Once” after playing it in Just Live until the scroller finished, then taking the FX off air and then playing it again. Previously the text scroller did not play at all the second time as it was still “finished”, now the finished state is reset and the text scroller starts again from the beginning.

Just Playout 2025.4.0.GM.1465 Release Notes

• This version includes Composition Builder 2025.4.0.GM.342. Please refer to separate release notes.
• Fixed a crash after activating the audio monitor in the scheduling interface.

Just Playout 2025.4.0.GM.1464 Release Notes

• This version includes Composition Builder 2025.4.0.GM.342. Please refer to separate release notes.
• Fixed a bug that could result unexpected behaviour for a channel configured with SDI live input and output other than SDI.

Just Playout 2025.4.0.GM.1463 Release Notes

• This version includes Composition Builder 2025.4.0.GM.341. Please refer to separate release notes.
• Fixed an issue that caused the output to visibly “stall” using “HLS Push” output to e.g. YouTube.

Just Playout 2025.4.0.B1.1462 Release Notes

• This version includes Composition Builder 2025.4.0.GM.340. Please refer to separate release notes.
• Updated Blackmagic Decklink drivers to Desktop Video 15.3. If you are using a Decklink device, please update your system to this version.
• Updated Blackmagic ATEM drivers to 10.1.1. If you are using an ATEM device, please install ATEM Switchers 10.1.1 update.
• Updated to NDI 6.2.1 for improved performance and stability when using NDI input and/or output.
• Fixed a crash starting a channel configured with SRT, UDP or RTMP output.
• In the “Activation” tab in the configuration panel, if there is a valid license the license key is now displayed for your reference.

Just Playout 2025.4.0.B1.1461 Release Notes

• This version includes Composition Builder 2025.4.0.GM.339. Please refer to separate release notes.
• Updated Blackmagic Decklink drivers to Desktop Video 15.2. If you are using a Decklink device, please update your system to this version.
• Updated Blackmagic ATEM drivers to 10.1. If you are using an ATEM device, please install ATEM Switchers 10.1 update.

Just Playout 2025.4.0.B1.1460 Release Notes

• This version includes Composition Builder 2025.4.0.GM.338. Please refer to separate release notes.
• Fixed a bug that resulted in corrupt audio using “HLS File” output.
• Using the “Clear, load and play” option for the “Double-click action” on a Just Live channel, double-clicking the currently on-air item now immediately starts playing that item from the start.
• When setting up Just Control for the first time, the initial setup splash screen has the correct descriptions for Just Play and Just Live under the logos.

Just Playout 2025.4.0.B1.1459 Release Notes

• This version includes Composition Builder 2025.4.0.GM.337. Please refer to separate release notes.
• There is a new “HLS Push” output available that can push HLS segments and manifest to a server via http or https, for example to YouTube. When configuring this output, there is a “YouTube” button to automatically configure the parameters for uploading to YouTube.
• Renamed the “HLS” output to “HLS File” to better distinguish between it and “HLS Push”.
• When configuring a “HLS File” output, the “Choose” button is now correctly disabled when the channel is running, and shows the file selection panel when clicked allowing you to select the folder to save the HLS segments and manifest.

Just Playout 2025.4.0.B1.1458 Release Notes

• This version includes Composition Builder 2025.4.0.GM.336. Please refer to separate release notes.
• After selecting NDI output, it is now possible to select a RGBA mode in order to send video with alpha to a compatible receiver. This enables “fill+key” workflows using NDI.

Just Playout 2025.4.0.B1.1457 Release Notes

• This version includes Composition Builder 2025.4.0.GM.335. Please refer to separate release notes.
• Fixed unexpected results in the scheduling (e.g. after using “jump to next”) on a Just Play channel with Just Out configured to output video timecode.
• When Just Out is configured to output video timecode and the currently playing video doesn’t have a timecode track, or nothing is playing out, the output timecode is now 00:00:00:00 instead of the current channel timecode.
• For a Just Live channel, the “PREVIEW” view (that shows a preview of the currently selected item in the workbench) now shows the video timecode for a video with a timecode track if the “Show video timecode where available” setting is enabled.
• There is a new “Clear, load and play” option for the “Double-click action” for Just Live channels. When selected, double-clicking an item on the workbench will clear any items on the same layer (either on-air or scheduled in the timeline) and immediately being playing the selected item.

Just Playout 2025.4.0.B1.1456 Release Notes

• This version includes Composition Builder 2025.4.0.GM.334. Please refer to separate release notes.
• Internal build.

Just Playout 2025.4.0.B1.1455 Release Notes

• This version includes Composition Builder 2025.4.0.GM.333. Please refer to separate release notes.
• Fixed a bug that resulted in live input failing with AJA devices.

Just Playout 2025.4.0.B1.1454 Release Notes

• This version includes Composition Builder 2025.4.0.GM.332. Please refer to separate release notes.
• Internal build.

Just Playout 2025.4.0.B1.1453 Release Notes

• This version includes Composition Builder 2025.4.0.GM.331. Please refer to separate release notes.
• Fixed a bug that resulted in live input failing with AJA devices.

Just Playout 2025.4.0.B1.1452 Release Notes

• This version includes Composition Builder 2025.4.0.GM.330. Please refer to separate release notes.
• Fixed a bug that resulted in live input failing with AJA devices.
• The Just Out diagnostics window now shows the specific name (e.g. SRT, UDP, RTMP, HLS) of the output stream instead of a generic “Stream output”.
• Removed “Audio Output” from the Just Out diagnostics window as it was always the same as “Video Output”, renamed “Video Output” to “Output” and added “Input” to show the current live input device for the channel if configured.

Just Playout 2025.4.0.B1.1451 Release Notes

• This version includes Composition Builder 2025.4.0.GM.329. Please refer to separate release notes.
• Fixed a bug that required the channel to be started and stopped again after changing the live input configuration before the settings were then correct when configuring an engine’s input device.
• Added HLS output when configuring an engine’s output device. Selecting this writes a HLS manifest and HLS file segments to the selected path and name.

Just Playout 2025.4.0.B1.1450 Release Notes

• This version includes Composition Builder 2025.4.0.GM.328. Please refer to separate release notes.
• If live input is enabled for a channel, it is now possible to preview the current input in the user interface even if it is not currently on air. To preview, simply select “Live Input” in the library, open the preview below the library, move the mouse over the preview area and click on the “play” button just as with previewing video, audio or FX files.
• Added an additional option to output RTMP (or RTMPS) for streaming to YouTube, Wowza or other video servers. When configuring there is an additional button for YouTube for quick configuration using the stream ID from YouTube.
• The restriction that the live input and output “device” are the same (e.g. SDI, NDI) has been lifted, enabling many more combinations such as SDI output with NDI live input or vice-versa. To this end, the engine configuration panel has been redesigned, with the “Streaming” tab and the device selection in the “Setup” tab now replaced by “Input” and “Output” tabs allowing individual configuration for the input and output including the device to use.

Just Playout 2025.4.0.B1.1449 Release Notes

• This version includes Composition Builder 2025.4.0.GM.327. Please refer to separate release notes.
• Fixed a bug that resulted in unexpected results rendering any FX (Quartz Composer, Composition Builder, HTML) in any interlaced format, particular with movement / animation (e.g. scroller, crawler).

Just Playout 2025.4.0.B1.1448 Release Notes

• This version includes Composition Builder 2025.4.0.GM.326. Please refer to separate release notes.
• Fixed a bug that resulted in Composition Builder graphics without any stop-frames defined not rendering at all.
• When selecting an RGBA format, there are now two colourspaces available, one with the suffix “Pre-multiplied RGBA” and one with “Straight RGBA”. You can select the one most suited to the video mixer or downstream equipment that you are using as some will work with pre-multiplied RGBA, some will not, and some will accept both.

Just Playout 2025.4.0.B1.1447 Release Notes

• This version includes Composition Builder 2025.4.0.GM.325. Please refer to separate release notes.
• The Just Control App settings “Playout” tab there is a new “Show video timecode where available”. By default this is off, but when selected the video trimmers (both library and inspector) and the inspector fields for in- and out-points will display timecode relative to the video asset’s timecode track. So, for example, if the in-point is set to one second after the start of the video, and the video has a timecode track with the first frame specified as 10:00:00:00, then the in-point in the inspector and trimmers would be shown as 10:00:01:00.
• When configuring the engine in the “Engine & Layers” tab, the “Setup” tab has a new “Output video timecode if available” checkbox. By default this is off, but when selected the timecode sent to the SDI output will be the timecode specified by the currently playing video instead of the channel’s current clock time. Using the previous example, the first frame of the video would have the timecode 10:00:01:00 on the SDI output. This setting also affects the timecode shown in the Just Control’s user interface, as it shows the engine’s output timecode. So here the main timecode in the user interface would also show 10:00:01:00 instead of the current clock time.

Just Playout 2025.3.1.GM.1446 Release Notes

• This version includes Composition Builder 2025.3.0.GM.324. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Internal build.

Just Playout 2025.3.1.GM.1445 Release Notes

• This version includes Composition Builder 2025.3.0.GM.323. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Internal build.

Just Playout 2025.1.2.GM.1427 Release Notes

• This version includes Composition Builder 2025.1.0.GM.294. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a bug that resulted in incorrect colours from an FX template (Quartz Composer, Composition Builder, HTML) when using transparency. For example, a pixel in an FX defined with full red and 50% alpha (1, 0, 0, 0.5) should result in a red value of 0.5 or 50% (1 * 0.5), but instead was resulting in a value of 0.25 or 25% (1 * 0.5 * 0.5).
• Fixed a bug that resulted in incorrect alpha values in the “key” output when using SDI Fill+Key via an RGBA format. For example, a pixel with an alpha of 50% or 0.5 would result in a key value of 25% or 0.25 (0.5 * 0.5).
• The majority of the channel settings (users, user interfaces, gaps, FX and SFX) have been moved from the multi-viewer inspector to a new “Channel” tab in the scheduling tab inspector.
• The “Help” menu in Just Out and Just Connect applications now opens the online documentation.

Just Playout 2025.1.2.GM.1426 Release Notes

• This version includes Composition Builder 2025.1.0.GM.293. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• If you try to remove all of the current users from a channel, you will see an error and be asked to remove fewer users as a channel without users is unusable.
• All changes to users including name and password are now applied “live”, meaning if you rename the user currently “logged in”, you will automatically be disconnected and will need to log in again using a different, valid user name.
• Fixed a bug that could result in a channel’s “action button” (e.g. to open the scheduling UI) disappearing after logging into Just Control, requiring you to move the mouse out of and back inside of the channel viewer to show the action button.

Just Playout 2025.1.1.GM.1425 Release Notes

• This version includes Composition Builder 2025.1.0.GM.292. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a bug in rare cases when a video asset’s video track was a frame or more shorter than the audio track(s) would result in a “dropped frame” error.

Just Playout 2025.1.1.GM.1424 Release Notes

• This version includes Composition Builder 2025.1.0.GM.291. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a bug that resulted in the “live on air” view in Just Live’s scheduling tab being too small or incorrectly sized after opening the scheduling tab on certain displays. After resizing Just Control’s window the view was then sized correctly.
• Resolved an issue where the “action button” to open the scheduling tab for a Just Live or Just Play channel in the multi-viewer was occasionally missing.

Just Playout 2025.1.1.GM.1423 Release Notes

• This version includes Composition Builder 2025.1.0.GM.290. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Any updates to the users in the multi-viewer inspector (e.g. access rights) are now applied immediately instead of requiring a restart of Just Control.
• Fixed a bug that prevented Just Live channels with the restricted user interface option activated from connecting.

Just Playout 2025.1.1.GM.1422 Release Notes

• This version includes Composition Builder 2025.1.0.GM.290. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• When configuring and channel with NDI live input, there is a new “NDI Timecode Mode” setting in the “Streaming” tab in the engine’s configuration panel with the options “NDI UTC Timestamps” and “SMPTE Timecode”. The former expects frames with standard NDI UTC timestamps, as provided by the majority of NDI devices. The latter expects SMPTE timecode encoded as 100ths of a nanosecond. This may be useful in conjunction with some devices such as the AJA Bridge that take embedded SDI SMPTE timecode and converts it for use with NDI.
• Quartz Composer and Composition Builder templates with multi-live text input fields with up to 5 lines are now supported in the Just Play and Just Live inspectors.
• When configuring items in the “User Interfaces” group in the multi-view inspector, the “IP” column is now wider to prevent clipping of longer IP addresses.

Just Playout 2025.1.1.GM.1421 Release Notes

• This version includes Composition Builder 2025.1.0.GM.289. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a bug that could result in gaps in a Just Play channel’s schedule after copying and pasting a playlist multiple times.
• Fixed a bug that could result in gaps in a Just Play channel’s schedule after using the “jump to next” function, particularly with long items (video or live input of 2 hours or more) and with many chained playlists scheduled over the next few days.
• Fixed a bug that could result in Just Out automatically restarting after using the “jump to next” function on a Just Play channel with many chained playlists scheduled over the next few days.

Just Playout 2025.1.1.GM.1420 Release Notes

• This version includes Composition Builder 2025.1.0.GM.288. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed issues related to changing the in-point of a video that was already loaded in the timeline and cued.

Just Playout 2025.1.1.GM.1419 Release Notes

• This version includes Composition Builder 2025.1.0.GM.288. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a bug related to all “Hold” end actions in Just Live. Regardless of “Hold Last”, “Hold and Play Next” or “Hold and Cue Next”, the video would either continue playing if an out-point was defined for the video, or play out black instead of holding the last frame.
• Fixed a bug with the “Reload” and "Recue" end actions in Just Live that resulted in an un-playable video.
• Fixed a crash related to the “Cue Next” and “Hold and Cue Next” end actions in Just Live.

Just Playout 2025.1.0.GM.1418 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.287. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Improved logging. Instead of writing a single log file every 24 hours, a file is now written each hour. This prevents missing logs on systems with heavy log loads (e.g. with other software or services installed that have excessive logging).

Just Playout 2025.1.0.GM.1417 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.286. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a crash using SRT or UPD live input streams when connecting to certain sources.
• Updated the EULA.
• Updated the link to the user manual for Composition Builder 2025.

Just Playout 2025.1.0.GM.1416 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.285. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• The “Engine Output” component in Composition Builder templates is now supported again, allowing the composition to change the position and size of the video when rendering. If you have compositions using the Engine Output component you need to open and save them with build 2025.1.0.GM.285 of Composition Builder in order to be compatible with Just Out. If you are using the Engine Output with a Quartz Composer composition (QTZ), please contact ToolsOnAir directly for further information.
• Updated the “TNN News” and “Sidescrolling Credits (QC)” templates in the Template Package to be compatible with the new Engine Output requirements. In order to test these templates, please install or re-install the latest Template Package.

Just Playout 2025.1.0.GM.1415 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.284. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Updated all links to the 2025.1 online documents.

Just Playout 2025.1.0.B1.1414 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.284. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• FX templates that show information about the currently playing video now also function correctly when played in a Just Live channel.

Just Playout 2025.1.0.B1.1413 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.284. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Removed the video buffer indicator from the engine status in Just Connect’s diagnostics window.

Just Playout 2025.1.0.B1.1412 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.283. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed brightness issues in Just Play’s scheduling tab.

Just Playout 2025.1.0.B1.1411 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.283. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a crash in Just Control opening the inspector in the scheduling tab when a Live Input, Gap or Placeholder event selected.

Just Playout 2025.1.0.B1.1410 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.283. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a crash in Just Out for channels configured for SRT or UDP streaming.

Just Playout 2025.1.0.B1.1409 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.282. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed issues playing out FX (Quartz Composer / Composition Builder / CEF HTML) that resulted in leaked memory and eventually to low system resources and crashes.
• In the channel configuration “Format” tab, renamed “HDR Rec. 2020” formats to more technically correct “HDR Rec. 2100”.
• Fixed a crash configuring just:in event presets in Just Control.
• Fixed a crash after executing a just:in event preset in Just Out.

Just Playout 2025.1.0.B1.1408 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.281. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a bug that made it impossible to “hide” an infinite FX, either by hiding the track itself, or hiding it for the duration of a specific video.
• Reduced log file sizes when using SRT/UDP live input streams.

Just Playout 2025.1.0.B1.1407 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.280. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed video/audio sync issues with SRT/UDP live input streams.

Just Playout 2025.1.0.B1.1406 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.279. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• The errors status icon is now also shown in the Just Live scheduling tab as well as the Just Play tab.

Just Playout 2025.1.0.B1.1405 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.279. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed video/audio sync issues with SRT/UDP live input streams.
• Fixed a bug that resulted in videos with timebase correction (e.g. a 29.97i clip in a 25i channel, or a 25p clip in a 50p channel) playing incorrectly after a re-load or re-cue.
• The errors status icon in the Just Play and Just Live scheduling tabs is now clickable. A simple click will automatically switch back to the multi-viewer and open the inspector if closed to show the channel’s messages. A control-click will clear all of the channel’s errors (and any other messages).

Just Playout 2025.1.0.B1.1404 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.278. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a bug that made it impossible to start Just Out for a live channel with a video that has decoding errors on the workbench. In this case Just Out would always automatically quit soon after starting.
• For improved performance, Just Out running a Just Live channel will now only start processing frames once all of the files on the workbench have been pre-loaded.
• Fixed issues related to starting Just Out with a Just Live channel containing a looped video.

Just Playout 2025.1.0.B1.1403 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.277. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• If a channel has any error or warning messages, the Just Play and Just Live scheduling tabs now display a warning icon in the control area if the “Error display” setting is set to “Show icon in the lower bar”. Otherwise the live preview has an overlay indicating the errors.
• Fixed a bug that resulted in late frames when re-loading or re-cueing a video in Just Live.
• When editing a HTTP event with a payload, the editor field disabled smart quotes to prevent single and double quotes being automatically changed into invalid quotes.

Just Playout 2025.1.0.B1.1402 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.276. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Any live input (SDI, NDI, stream) now uses the correct colourspace (Rec.601, Rec.709, Rec.2020 HLG or PQ) instead of always defaulting to Rec.709.

Just Playout 2025.1.0.B1.1401 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.275. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• This build is only supported on Apple Silicon Macs, older Intel Macs are no longer supported.
• This build is only supported on macOS 13.5 and higher. Older versions are no longer supported.
• Removed the “TOA System Checker” App from the DMG, please refer to the relevant “Getting Started” documentation online for detailed information related to system requirements.

Just Playout 2025.1.0.B1.1400 Release Notes

• This beta release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.274. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• If a video drops a frame (most likely due to either performance or storage issues), this is now reported correctly in Just Control’s multi-viewer inspector for the channel and in Just Out’s diagnostics window.
• Fixed bugs related to locked playlists and using “jump to next”, if either the currently playing video and/or next video are part of a locked playlist.
• The HDR colour configuration panel now has a “Defaults” button that allows for quickly resetting all parameters to their default values.
• The TOA System Checker has been updated with the latest Mac models and support GPUs.

Just Playout 2025.1.0.A1.1399 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.273. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Updated all copyright notices to 2025.
• If Just Out repeats or skips any frames in order to synchronise its timecode with the reference time, a warning is now display in Just Control’s multi-viewer inspector for the channel.
• The “Jump To Next” group button underneath the multi-viewer inspector is now disabled after clicking it for one second in order to prevent the button being clicked several times very quickly.

Just Playout 2025.1.0.A1.1398 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.272. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed correct scaling of colours using the “Linear Scale” mapping from SDR to HDR for HLG and PQ HDR formats.
• Fixed issues showing the correct SDR to HDR mapping in the HDR configuration panel in Just Control for HLG and PQ HDR formats.
• Fixed a bug that resulted in the HDR configuration panel in Just Control showing incorrect values after changing the channel’s colourspace.

Just Playout 2025.1.0.A1.1397 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.271. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• As was previously the case with v5.5, if the hardware device (e.g. AJA or Blackmagic) is suddenly unavailable during operation (e.g. the cable is disconnected), Just Out will now automatically restart and wait until the hardware is available again before starting.

Just Playout 2025.1.0.A1.1396 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.270. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed incorrect conversion of colours between SD Rec.601 and HD Rec.709.
• In the channel’s “Format” configuration tab there is a new configuration button next to the colourspace selection menu. Clicking this will allow you to adjust the colourspace conversion parameters related to SDR and HDR, including the PQ mastering nits, the SDR to HDR conversion nits level and the conversion technique used to convert SDR to HDR and HDR to SDR. In addition a viewer is provided to show how the various primary colours will be converted from SDR to HDR.

Just Playout 2025.1.0.A1.1395 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.269. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Improved conversion of SDR video in a HDR channel, the video is now mapped to a peak of 600 nits instead of 1000.
• Fixed an issue playing PQ video in a HLG channel.
• Fixed a bug that resulted in audio corruption and/or drop-outs using “virtual” output.

Just Playout 2025.1.0.A1.1394 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.268. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Enhanced VANC processing when using live input with AJA devices so that all incoming VANC packets (e.g. closed captions, SCTE-104, OP-47 subtitles) are included in any recording, not just closed captions. VANC processing is also active for all frame-rates, not just NTSC rates.
• Fixed issues playing out SDR video and/or FX in a Rec.2020 HLG channel.
• Fixed issues playing out SDR video and/or FX in a Rec.2020 PQ channel.
• Fixed issues playing out HDR video encoded with HLG in a Rec.2020 PQ channel or vice-versa.
• Resolved a bug that resulted in some videos showing “unknown” colourspace in Just Control’s library.
• Fixed a bug where “Aired” was always recorded in the “As Run Log” even if the file was missing or unreadable. Now missing assets are correctly recorded as “Not Aired” in the ASR.

Just Playout 2025.1.0.A1.1393 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.267. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• When Just Out’s main timecode drifts against the reference time, frames are now correctly skipped or duplicated at the end of a playlist in Just Play or each minute when nothing is currently playing.

Just Playout 2025.1.0.A1.1392 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.267. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed incorrect output for Rec.2020 HDR HLG channels running on macOS 15 Sequoia.

Just Playout 2025.1.0.A1.1391 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.266. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed corrupt output on certain devices (e.g. AJA SDI) for HD 720p formats.

Just Playout 2025.1.0.A1.1390 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.265. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a bug that resulted in white output playing SDR video on a Rec.2020 HLG channel.

Just Playout 2025.1.0.A1.1389 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.264. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Improved conversion of Rec.2020 HLG to SDR, for example in the preview in Just Control or when playing HLG encoded video in a SDR channel.

Just Playout 2025.1.0.A1.1388 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.263. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed Rec.2020 HLG output where, for example, black was green.

Just Playout 2025.1.0.A1.1387 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.262. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• SDR content (e.g. SDR video or FX overlays) is now converted correctly for HDR (HLG or PQ) channels.
• Removed UHD RGBA formats as the majority of devices don’t currently support fill+key output with UHD formats. These formats will be enabled in the future as device support improves.

Just Playout 2025.1.0.A1.1386 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.261. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a potential memory leak when using AJA devices with live input.
• Fixed a crash related to starting a video (or looping in Just Live).
• Fixed a crash related to playing a video with a unknown colourspace.

Just Playout 2025.1.0.A1.1385 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.260. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed an issue on macOS 15 Sequoia that meant it was not possible to lock the multi-viewer inspector using the “option” key with the mouse over the inspector’s close button.

• If a channel has been added to more than one group, removing the channel from one group no longer removes it from all groups, only from the group to which the selected item in the inspector belongs.

Just Playout 2025.1.0.A1.1384 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.259. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Improved visual fidelity when converting SDR video to HDR or HDR video to SDR.
• Fixed a crash playing out video with VANC (e.g. closed captions) via NDI.

Just Playout 2025.1.0.A1.1383 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.258. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Improved SDI output colour accuracy, particularly for RGBA (fill+key) formats and when converting between colourspaces (e.g. Rec.709 to Rec.601 or vice-versa).

Just Playout 2025.1.0.A1.1382 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.257. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• SDI outputs now have the correct embedded timecode.
• The “Playlist Buffer” entry in Just Out’s Diagnostics window now correctly shows the length of the current playlist stored by Just Out.
• When a RGBA output format is selected for fill+key output using a SD format, the fill output now uses the correct colour levels as defined by the Rec.601 colourspace.

Just Playout 2025.1.0.A1.1381 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.256. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a crash playing out ProRes 4444 video (without alpha, but with 4:4:4 sampling).

Just Playout 2025.1.0.A1.1380 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.255. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a bug that resulted in Just Out restarting automatically after playing a video for a second time or more.
• Resolved a bug that resulted in all SD (Rec.601) encoded video being far too bright when played out. In addition, video is now gamut-mapped between colourspaces (e.g. Rec.601 on a Rec.709 channel).
• Composition Builder templates (e.g. “TNN News”) that use the “engine output” (live video) within the FX now render without the engine output (transparent) instead of a grey rectangle.

Just Playout 2025.1.0.A1.1379 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.254. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a bug that resulted in Just Out freezing on start-up using certain AJA devices with certain output formats.
• Fixed a bug that resulted in Just Out freezing when quitting Just Out using an AJA device.
• Resolved a bug that resulted in Just Out no longer rendering FX correctly.

Just Playout 2025.1.0.A1.1378 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.253. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• Fixed a bug that under rare circumstances could result in Just Out not being able to render any Composition Builder templates.
• Fixed a bug that resulted in videos played in a Just Live channel playing incorrectly after being played out once.

Just Playout 2025.1.0.A1.1377 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.252. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• The REST API published by Just Connect includes a new /playout/webSocket end-point to upgrade the connect to a websocket for bi-directional async messaging and notifications.
• Updated NDI to v6.1.1 for improved stability and performance.
• Fixed a bug that resulted in Just Out restarting at the end of each video, assuming that the end-point was set to the end of the video’s defined range.
• Fixed a bug that resulted in Just Out crashing after pausing a video and changing certain attributes (e.g. colourspace, loop, out-point).
• The “short version” of the Apps shown in Finder now show the correct version in the format “2025.x.y”.

Just Playout 2025.1.0.A1.1376 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.250. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• NDI VANC metadata is now conforms to the ToolsOnAir specification as agreed with Newtek.

• Updated Blackmagic drivers to release 14.3. If you are using Blackmagic devices, please update your system to this release.

Just Playout 2025.1.0.A1.1375 Release Notes

• This alpha release of Just Play and Just Live 2025.1.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 2025.1.0.GM.249. Please refer to separate release notes.
• This release requires a new 2025 license code. If you have a valid license for an older release (v5.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just Connect to have a live internet connection.

• It is now possible to deactivate Just Connect in order to transfer the license to another system. Again, this requires the system running Just Connect to have a live internet connection. Once deactivated, the license key can be used to activate Just Connect on another system.

Just Playout 6.0.0.A1.1374 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.248. Please refer to separate release notes.

• Contains a new build of Composition Builder that supports custom icons and Quick Look previews for .composition documents on macOS 15 Sequoia and higher. When you run Composition Builder, you should see a notification from macOS that an extension has been added to the system. After this, open “System Settings”, then select “General” and “Login Items & Extensions”. Then in the “Extensions” section, locate “Quick Look” and click the “Info” (i) icon to the right. In the pane that appears, locate and ensure that “Composition Builder” is enabled. After the next system re-boot, all icons and previews should appear in Finder and in ToolsOnAir Apps as expected.

Just Playout 6.0.0.A1.1373 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.247. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Improved the visual quality of the live channel feed in Just Control. In addition, for HDR channels the live channel feed is now mapped back to SDR.
• Fixed a bug that resulted in QTZ / Composition Builder stop frames being ignored after playing the template the first time in a Just Live channel.
• Fixed a bug that resulted in Just Out “freezing” (spinning wheel) after either quitting or stopping the channel in Just Control, requiring a “Force Quit”.

Just Playout 6.0.0.A1.1372 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.247. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Just Out can now play out Rec.2020 HDR content in either HLG or PQ using a Blackmagic or AJA device. In order to select HDR output, you must first select a UHD 10-bit format and then the correct colourspace in the menu underneath the format selection. SDR content will be mapped to HDR using a spine-curve tone-mapper.

• Updated the “TOA System Checker” App with the latest Mac models and GPUs, and added a check that the local calendar format is Gregorian, as this is a requirement when running this software.
• In Just Control’s settings there is a new “Error display” option to set how errors and warnings are displayed in the multi-viewer. The new “Show icon in the lower bar” setting shows a small warning icon in the channel’s lower bar next to the timecode option button when the channel has any warnings or errors. Clicking on the button opens the inspector if closed to the “Settings” tab to show any messages. Using control-click will clear any messages for the channel. The “Show icon and status over the viewer” setting shows the “ERRORS” status with warning icons over the channel’s preview, as was the case in previous versions.
• Renamed the “Warnings and Errors” group in the inspector to “Messages”.
• Fixed missing station ID SimpleFX for UHD channels.
• Fixed an occasional crash when quitting or restarting Just Out.
• Resolved a bug where videos that didn’t match the channel’s frame-rate with an in-point set would start playing at an incorrect frame.
• Fixed a bug where changing a video’s in-point in Just Live for a video on the workbench resulted in the video playing from the first frame instead of the in-point.
• Compositions using the “TOA Engine Output” (which is discontinued in this version) now no longer render a grey rectangle for the output. Instead, nothing is rendered leaving the background transparent.

• Updated Blackmagic drivers to release 14.3. If you are using Blackmagic devices, please update your system to this release.

• Updated NDI to v6.1 for improved stability and performance.

• NDI VANC metadata is now sent using the standard recommended root XML tag to ensure better interoperability with other NDI devices.
• Just Connect now automatically publishes a HTTP REST API. To access the documentation, open a browser to http://localhost:8080/swagger-ui/index.html (or the IP address of the machine running Just Connect instead of “localhost”, or use the button in the device settings in Just Control.

Just Playout 6.0.0.A1.1371 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.246. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Improved compatibility running on macOS 15 Sequoia when connecting with other ToolsOnAir applications on the local network.
• When selecting a format in the channel’s configuration, only the valid colourspaces for the selected format are now enabled, and the default for the given format is automatically selected.
• For channels using NDI live input, selecting a different input in the channel’s multi-viewing inspector now results in the live input source switching to the selected NDI source.
• For videos in a Just Live channel, when slow motion is enabled (e.g. playback speed other than 100%), the “Loop” property is now disabled.
• Fixed a bug that caused an FX scheduled on a disabled (non-visible) FX layer to “flash” on the first frame.
• Fixed a bug that resulted in videos fade in / fade out settings being ignored.
• Fixed a bug that resulted in an audio “blip” at the start of a video configured to fade in.

Just Playout 6.0.0.A1.1370 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.245. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Fixed a bug that resulted in unexpected behaviour (FX not rendered) after scheduling a Composition Builder template.

Just Playout 6.0.0.A1.1369 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.244. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• The restriction on mixing videos with different timebases has been fully lifted, meaning that any video encoded with a “standard” broadcast timebase can be played on any channel. Frames are duplicated or dropped to match the channel’s timebase.
• Fixed a crash in Just Control when scanning the metadata for the library.

Just Playout 6.0.0.A1.1368 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.244. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• The restriction on mixing videos with different timebases has been partially lifted. Specifically, videos with a factor of either 2 or 0.5 compared to the channel’s timebase can now be scheduled on the channel, for example p25 on a p50 channel or vice-versa. Such videos are now coloured yellow in the library in Just Play and Just Live’s scheduling tab, and can be selected, previewed and trimmed, and dragged and dropped into the schedule / workbench. When playing, frames will be dropped or duplicated to match the channel’s timebase. Note that the frames part of the duration shown in the library and the scheduled duration will be different due to the different timebases. For example, a p25 video with a duration of 00:00:10:10 (10 seconds and 10 frames) scheduled on a p50 channel will have a duration of 00:00:10:20, as each frame is doubled.
• The “Playback Speed” property for videos in a Just Live channel is now respected by Just Out, allowing for “slow motion” playback of video.
• Fixed a bug that resulted in an incorrect “fill” part of the “video+fill” output (for RGBA formats).
• Resolved an issue that resulted in hidden FX layers still showing the FX (infinite FX layers could be hidden, but not “regular” FX).

Just Playout 6.0.0.A1.1367 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.243. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Fixed a bug where the “Live Volume” setting for a movie playing on a Just Live channel was ignored, and the output was always a mix of the movie’s audio with the live input audio.

Just Playout 6.0.0.A1.1366 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.243. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• SRT and UDP live input streams now support multiple audio tracks with a total of up to 16 audio channels. For example, a stream with 8 stereo audio tracks will result in 16 audio channels for the live input.
• Fixed a crash that sometimes occurred quitting Just Out with live input enabled.

Just Playout 6.0.0.A1.1365 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.242. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• SRT and UDP live input streams now support multiple audio tracks with a total of up to 16 audio channels. For example, a stream with 8 stereo audio tracks will result in 16 audio channels for the live input.

Just Playout 6.0.0.A1.1364 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.241. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Resolved a bug that resulted in missing audio for live inputs after the signal was lost and then restored.

Just Playout 6.0.0.A1.1363 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.240. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Resolved a bug that resulted in some of the templates in the template package (specifically Clip Progress and Clip Info (QC), Display Current Clip Name (QC), Display Next Clip Name (QC) and Progress Bar (QC)) not rendering correctly.
• There is a new “Colourspace” column in the library’s “Video” tab and in the workbench in Just Play and Just Live’s scheduling tab that shows the detected colourspace for the given video file. Once a video is scheduled, the inspector also includes a “Colourspace” menu that allows the colourspace to be changed.

Just Playout 6.0.0.A1.1362 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.239. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Fixed a issue that resulted in the offset between the channel and reference timecode being a few frames after initially starting Just Out, particularly with AJA and Blackmagic devices.
• Fixed a bug that resulted in Just Connect switching from failover back to main too quickly after restarting the main engine, resulting in a few black frames on air.
• Resolved an issue changing or removing either SimpleFX or InfiniteFX on a track in Just Control that required a restart of Just Out for the changes to be applied. Now any changes are immediately reflected in Just Out without a restart.
• Fixed a bug when the FX1 layer had infinite FX assigned where dropping a new FX to a Just Live channel’s workbench resulted in the FX being assigned to FX1. Now, the first available FX layer without InfiniteFX will automatically be selected for any new FX items in the workbench.

Just Playout 6.0.0.A1.1361 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.238. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Removed some older templates from the Template Package.
• Fixed resizing issue with the multi-viewer inspector, for example when switching Just Control between full-screen and windowed mode.
• Fixed a crash starting Just Out on a system where the “Just Playout” folder wasn’t installed in Applications, or after specifying an invalid or missing SimpleFX path.
• Resolved a bug where enabling or disabling (hiding, unhiding) FX tracks in Just Play or Just Live’s scheduling interface was ignored.

Just Playout 6.0.0.A1.1360 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.238. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Significantly reduced delay for live input sources, particularly when using an AJA device.

Just Playout 6.0.0.A1.1359 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.237. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Fixed a bug where the next scheduled video in Just Play’s timeline would ignore any changes to the in-point made while the previous video was already on air.
• Fixed unexpected behaviour after deleting any item from the workbench in Just Live.

Just Playout 6.0.0.A1.1358 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.235. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Fixed a bug that caused random crashes in Just Out.

Just Playout 6.0.0.A1.1357 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.236. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Fixed a bug that resulted in a crash starting Just Out with any 525i format.
• Fixed a bug that resulted in Just Out not starting up correctly with any RGBA format.
• Fixed a bug that resulted in a crash starting Just Out with any 720p 10-bit format.
• Fixed a bug playing a QTZ or Composition Builder template with stop frames in Just Live where the FX in the timeline did not stop at the stop-frame and continued scrolling in the timeline.
• Fixed a bug playing a QTZ or Composition Builder template in Just Live more than once where the FX would only play out correctly the first time it was played, and not after that.
• Fixed a bug after changing a video’s in-point in Just Live before playing it out where the video would start from the previous in-point and not the new in-point.
• Fixed a bug changing the “loop” property of a video in Just Live where the video would not loop correctly.
• Fixed a bug where enabling or disabling the “SimpleFX” for a video wasn’t working for the last SFX item. In other words, disabling all SFX for a video resulted in at least one SFX still being displayed.
• Fixed a bug that resulted in Just Out not “re-syncing” the timecode after drifting against the reference timecode.
• Fixed a bug that resulted in unexpected behaviour on Blackmagic devices (late frames, audio and video in “slow motion”).

Just Playout 6.0.0.A1.1356 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.234. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• For SD channels with widescreen enabled, changing the aspect ration options for a video now results in the correct sizing.
• Fixed visual inconsistencies in the multi-viewer inspector on certain versions of macOS.
• The reference timecode in Just Out now works correctly, including restart when the main and reference timecodes drift.
• Changing input ports for QTZ or Composition Builder templates while they are on air now results in the template being correctly updated.

Just Playout 6.0.0.A1.1355 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.234. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Fixed a bug that could result in Just Out crashing or not playing out the current scheduled items after starting up in the middle of a scheduled playlist.
• When an input is too slow (e.g. playing a movie from network attached storage where the network connection is insufficient), the last valid frame is now repeated until the input is able to provide frames at the correct speed.
• Improved the stability of audio play out using the “Virtual” device.

• Updated AJA drivers to version 17.1. Please update your system drivers to this version if you are using AJA hardware.

Just Playout 6.0.0.A1.1354 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.233. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Fixed a bug that resulted in corrupt output for all devices other than “Virtual”.
• When creating a new channel, the channel’s colourspace is now set to the correct default for the selected format instead of “Rec.601 full-range” regardless of the format.
• Resolved a bug that resulted in an alert about the frame-rate being shown when selecting a different colourspace for a channel.
• Removed some details from Just Out’s “Diagnostic” window that are no longer relevant to the new low-latency pipeline.
• The “Buffer” indicator in Just Play and Just Live’s scheduling tab is now shown green/100% when the channel is running instead of red/0%.
• For unlicensed channels, the watermark “blip” is now correctly shown.
• Updated Blackmagic DeckLink drivers to 14.2 for improved stability, performance and compatibility. If you are using a DeckLink device, please update your system to this version.

Just Playout 6.0.0.A1.1353 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.232. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• This version of Just Playout uses an all-new low-latency processing pipeline, resulting in most actions (jump to next in Just Play, starting/stoping media in Just Live, changing properties) being reflected on-air much more quickly.
• Added a channel setting to set the primary (output) colourspace.
• Some channel settings (low-latency, interlaced aware scaling, buffer) have been removed as they are no longer relevant with the new processing pipeline.

Just Playout 6.0.0.A1.1352 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.231. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• Significantly improved performance and stability when rendering FX (Quartz Composer, Composition Builder, HTML).
• When using “Buffered Input, default pass-thru” and playing a video over the live input, the scheduled video is now shown on the output instead of the live input. When no video is scheduled, live input is shown on the output.
• Fixed corrupt watermark on the output for SD channels.
• For SD channels, the correct metadata is now displayed in the scheduling tab (library, inspector).
• Updated text on the ToolsOnAir System Preferences panel (and renamed the panel from “Tools On Air” to “ToolsOnAir”).
• Fixed a crash in Just Control after selecting the “Cornerlogo (QC).qtz” template from the TOA Template Package.

Just Playout 6.0.0.A1.1351 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.230. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.
• For infinite graphics on an FX layer, when selecting the file in the multi-viewer inspector there is an additional “Show Options” button that reveals an additional field to enter the URL of a HTML graphic template to render, for example one from singular.live.
• Fixed a bug that resulted in Just Out not starting correctly when a RGBA format was selected (e.g. for AJA DSK live input or fill+key SDI out).
• Resolved an issue that caused some QTZ and Composition Builder templates not to render correctly, particularly those loading data from XML.
• The “Invert Fields” property for movie files was ignored, now when selected the fields are inverted during rendering.
• When fade from and/or to black was configured for a movie file, the fade was ignored. Now the video correctly fades in and/or out.
• When playing video with a different aspect ratio (e.g. 4:3 in a 16:9 format), the aspect ratio positioning is now correct. For example, with pillar boxing the video is now centred horizontally instead of being rendered on the left edge of the output.

Just Playout 6.0.0.A1.1350 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.229. Please refer to separate release notes.

• This version of Just Playout uses an all-new graphics pipeline based on Apple’s Metal graphics framework. Some features may not be implemented, some may behave unexpectedly and there may be stability issues.

Just Playout 5.5.0.B1.1291 Release Notes

• This beta release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.227. Please refer to separate release notes.

• When SRT or UDP is selected for a channel, only 8-bit formats are now available, as with NDI channels.
• Removed an incorrect log that was resulting in very large log files.
• When two or more clients are connected to a channel, there is now additional spacing between the two status icons in the “Connections” multi-viewer inspector tab.

Just Playout 5.5.0.B1.1290 Release Notes

• This beta release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.226. Please refer to separate release notes.

• Fixed a bug that resulted in an error updating existing channels from previous releases, where the channels “disappeared” in Just Connect.

Just Playout 5.5.0.B1.1289 Release Notes

• This beta release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.225. Please refer to separate release notes.

• Updated Blackmagic DeckLink drivers to 14.0 for improved stability, performance and compatibility. If you are using a DeckLink device, please update your system to this version.

Just Playout 5.5.0.B1.1288 Release Notes

• This beta release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.224. Please refer to separate release notes.

• Any dropped frames on a buffered live input are now indicated in Just Control’s “Errors and Warnings” inspector group, with extended information in the tooltip detailing the number of frames and timecode.
• It is now possible to review an engine’s input and output streaming settings while the channel is running. Previously, the “Streaming” tab in the engine’s configuration panel was empty while the channel was running.

Just Playout 5.5.0.B1.1287 Release Notes

• This beta release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.223. Please refer to separate release notes.

• Updated Blackmagic ATEM drivers to 9.4 for improved stability, performance and compatibility. If you are using an ATEM device, please update your system to this version.

• Updated Blackmagic DeckLink drivers to 12.9 for improved stability, performance and compatibility. If you are using a DeckLink device, please update your system to this version.
• Fixed an issue that could cause connection and performance issues with NDI channels.

• Unified detection of dropped frames (a.k.a. gaps between two video frames) for all live inputs (SDI, NDI, SRT and UDP). Any dropped frames are now “filled” by duplicating the last frame before the gap for the given number of frames (with silent audio).

Just Playout 5.5.0.B1.1286 Release Notes

• This beta release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.222. Please refer to separate release notes.

• Updated NDI to 6.0.1 for improved performance and stability.
• Unified detection of dropped frames (a.k.a. gaps between two video frames) for all live inputs (SDI, NDI, SRT and UDP). Any dropped frames are now “filled” by duplicating the last frame before the gap for the given number of frames (with silent audio).
• When activating (starting) a channel in the configuration panel, if there is a single disconnected (empty) viewer in the multi-viewer, the channel is now automatically connected to the viewer. This makes making changes to a channel in a single-channel setup quicker and easier.
• Fixed a bug that meant that any SRT output stream could only be connected once and then a restart of Just Out was required to reconnect the stream.

Just Playout 5.5.0.B1.1285 Release Notes

• This beta release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.221. Please refer to separate release notes.

• The “ToolsOnAir Uninstalller” App now supports macOS 12 Monterey and above.
• Added an additional informational label below the SRT streaming IP address field to provide contextual help depending on the selected connection mode.
• When entering a SRT passphrase, it is now checked for a valid length of between 10 and 79 characters as per the SRT specification.
• Fixed a bug that could result in a crash when entering a search term in the scheduling tab’s library.

Just Playout 5.5.0.B1.1284 Release Notes

• This beta release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.220. Please refer to separate release notes.

• Fixed an issue that meant that Just Control and Just In Engine Apps would not start on macOS 12 Monterey.
• Fixed a bug that could sometimes result in lost connections between Just Control and the channels/viewers, particularly on Intel systems and with a large number of channels.

Just Playout 5.5.0.B1.1283 Release Notes

• This beta release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.219. Please refer to separate release notes.

• Fixed the sizing in the channel engine “Streaming” configuration tab so that the controls are wider and can display an IP address.
• The default H.264 bit-rate for streaming output is now 6000 instead of 1500.
• Fixed a bug that resulted in the “Channel is not assigned to a viewer” label in the multi-viewer inspector’s “Connections” tab not always being correctly displayed.

Just Playout 5.5.0.B1.1282 Release Notes

• This beta release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.218. Please refer to separate release notes.

• In the multi-viewer inspector’s “Connections” tab, the icons used to show the channel status have been changed from red/yellow/green “lights” to icons in order to make the status clearer and more understandable. Additionally, if a channel is selected that is not currently assigned to a viewer in the multi-viewer, a label to this effect is now displayed next to the action button.
• The multi-viewer inspector now has an additional button (a “cog” icon, last-but-one next to the “close” button) that opens the “Configuration” panel in order to make it quicker and easier to access the device/channel configurations. The icon to select the “Settings” tab in the multi-viewer inspector has been changed from the “cog” icon to a different icon.

Just Playout 5.5.0.A1.1281 Release Notes

• This alpha release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.217. Please refer to separate release notes.

• Updated links to install the latest version of Apple Pro Video Formats 2.3.
• Updated NDI license file for v6.
• Updated the license text in the “About” panel for Just Control, Just Connect and Just Out to reflect the use of ffmpeg and various 3rd-party libraries.
• Added a new “ToolsOnAir Uninstall” App to the DMG to completely remove all applications, preferences, settings, presets, channels, schedules and other data associated with ToolsOnAir.

Just Playout 5.5.0.A1.1280 Release Notes

• This alpha release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.216. Please refer to separate release notes.

• When selecting more than one channel in the multi-viewer, the inspector’s title now displays “X of Y channels selected” instead of “Multiple selected” where X is the number of channels selected and Y is the total number of currently connected viewers.
• SRT and UDP streams with MP2 (MPEG-1 Layer II) audio tracks in the MPEG transport stream are now supported.
• Fixed a bug that could result in missing ATSC A53 closed captions from certain devices (e.g. Blackmagic Web Presenter).

Just Playout 5.5.0.A1.1279 Release Notes

• This alpha release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.215. Please refer to separate release notes.

• Updated to NDI 6.0 for improved stability and performance.
• SRT and UDP streams now support SMPTE2038 for transport of VANC data (e.g. CEA708, OP47, SCTE104) for both output and live input.
• SRT and UDP stream now support ATSC A53 closed captions in the MPEG transport stream for both output and live input. For live input, ATSC A53 closed captions are disabled if the stream contains SMPTE2038.
• SRT and UDP stream now support SCTE35 events in the MPEG transport stream for both output and live input. For live input, SCTE35 is disabled if the stream contains SMPTE2038. Any SCTE35 events will be automatically converted to/from SCTE104.

Just Playout 5.5.0.A1.1278 Release Notes

• This alpha release of Just Play and Just Live 5.5.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.1.GM.214. Please refer to separate release notes.

• The license “blip” is now removed when the channel has a valid license.

Just Playout 6.0.0.A1.1277 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 6.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.214. Please refer to separate release notes.

• Fixed a bug that could cause SRT and UDP live input streams to fail on connection.

Just Playout 6.0.0.A1.1276 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 6.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.213. Please refer to separate release notes.

• Improved detection of format (frame-rate, field-order) for SRT and UDP live input streams.
• Fixed a bug related to the audio packets sent by some encoders (SRT and UDP live input streams).
• Resolved a bug that could result in incorrect video/audio sync for SRT and UDP live input streams.
• Removed “Rendezvous” from the available SRT connection modes.
• Updated Blackmagic ATEM drivers to 9.3.3. If you are using events with an ATEM device, please update your drivers to this version.

Just Playout 6.0.0.A1.1275 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 6.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.212. Please refer to separate release notes.

• SRT and UDP live input streams are now validated against the channel’s specified frame-rate.

• Fixed a crash connecting to an “invalid” SRT or UDP live input stream with mismatching frame-rate, scan mode or resolution.

Just Playout 6.0.0.A1.1274 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 6.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.211. Please refer to separate release notes.

• Fixed a bug that could result in a hang quitting Just Out configured with SRT or UDP live input while streaming.

• Fixed a bug that could result in a hang or crash quitting Just Out configured with SRT or UDP live input while the source wasn’t available (e.g. offline).
• Fixed a bug that could result in a hang quitting Just Out configured with SRT or UDP output.
• Fixed a bug that resulted in a channel’s SRT output only working once. When a client attempted to connect for a second or more time, the stream was previously no longer available.
• Fixed an audio/video sync issue with SRT or UDP output.

Just Playout 6.0.0.A1.1273 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 6.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.210. Please refer to separate release notes.

• Fixed a bug that resulted in an invalid configuration and Just Out crashing after creating a new channel with SRT or UDP streaming.
• Fixed a bug that sometimes resulted in an invalid configuration and Just Out crashing after changing an engine’s video video to SRT or UDP streaming.
• Fixed the size of the engine configuration panel that resulted in the “preview” controls in the “Setup” tab being hidden or placed below the tab.

Just Playout 6.0.0.A1.1272 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 6.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.210. Please refer to separate release notes.

• SRT and UDP streaming now function for all frame-rates, not just p25 and i25 formats.
• In the engine configuration panel, the “Streaming Output” tab has been renamed “Streaming” and now has two columns of settings, one for output and the other for input, allowing you to configure any live input stream for the channel. The encoding options for the output stream have been moved to a separate panel that can be shown by clicking the button at the top of the output stream options.
• Live input SRT and UDP streams are now working.
• The H.264 profile / level options have been extended to include more of the currently available profiles and levels.
• The encoding options (H.264 profile and bitrate and AAC audio bitrate) are now correctly set when configuring the output stream.
• The “send buffer” settings for SRT and UDP channels is now used when setting up the connection.
• When using a SRT live input for a channel, if there is an interruption (e.g. network issue, source is stopped and restarted), the stream will then reconnect once the source is available.

Just Playout 6.0.0.A1.1271 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 6.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.209. Please refer to separate release notes.

• Fixed a crash starting a channel configured with SRT streaming output.

Just Playout 6.0.0.A1.1270 Release Notes

• This alpha release of Just Play and Just Live 6.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 6.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.208. Please refer to separate release notes.

• When creating or configuring a channel, there are new options for SRT and UDP streaming output (combined with input for live events). The engine configuration panel has an additional 3rd “Streaming Output” tab that allows exact configuration of the format.

Just Playout 5.1.0.GM.1256 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.207. Please refer to separate release notes.

• Improved detection of “scan mode” metadata (progressive, interlaced, field order) for video files in the library (and therefore for items when dropped into the schedule), particularly for MP4 files and files encoded with MPEG-4 Video (‘mp4v’).

Just Playout 5.1.0.GM.1255 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.206. Please refer to separate release notes.

• Fixed a bug that resulted in the library’s “codec” column incorrectly showing red for field order mismatches, particularly progressive movie files for channels set to a progressive format. Additionally, items dropped into the schedule previously showed an incorrect “Interlaced” selection in the inspector, for example “Interlaced, Upper” instead of “Progressive”, now the selection should match the file’s settings. Note that this change requires metadata to be re-indexed, so when starting Just Control for the first time on a repository with metadata sidecar files, metadata will be slower to display until indexing is complete. Once complete, the library will respond as quickly as before the update.
• Resolved a bug that resulted in the “Invert Fields” property being automatically enabled when dropping a progressive movie file into the schedule of a channel set to a progressive format. Now this property is only automatically enabled for interlaced channels when the field order doesn’t match.

Just Playout 5.1.0.GM.1254 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.205. Please refer to separate release notes.

• Fixed a bug that causes audio to drop out completely after dropping frames on an AJA device using one of the “DSK” output modes.

Just Playout 5.1.0.GM.1253 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.204. Please refer to separate release notes.

• Fixed a memory leak and resulting crash caused by an NDI live input source not matching the channel’s specified format (e.g. frame-rate, resolution, scan).

Just Playout 5.1.0.GM.1252 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.203. Please refer to separate release notes.

• Fixed corrupt SDI output on certain AJA devices with some configurations.

Just Playout 5.1.0.GM.1251 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.202. Please refer to separate release notes.

• Fixed excessive logging on certain AJA devices with some configurations.

Just Playout 5.1.0.GM.1250 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.201. Please refer to separate release notes.

• Fixed a bug related to adding a new user interface to the list of user interfaces in the channel’s multi-viewer inspector where the interface was not active and would be reverted (lost) after restarting Just Connect if no further changes were made to the user interface’s configuration.
• Improved stability and performance using NDI live inputs.
• Improved stability when using AJA devices as buffered live inputs.

• Golden master.

Just Playout 5.1.0.GM.1249 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.200. Please refer to separate release notes.

• Updated all copyright notices to 2024.

Just Playout 5.1.0.GM.1248 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.199. Please refer to separate release notes.

• Fixed a bug that caused memory consumed by Just Out to increase continually when an NDI source without audio was used as a live input, eventually causing a crash and/or the system to run out of memory.
• NDI sources that switch between sending video only without audio and then video with audio are now supported as live inputs.
• Golden master.

Just Playout 5.1.0.GM.1247 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.198. Please refer to separate release notes.

• Fixed a bug that incorrectly showed p30 files as p29.97 and p60 as p59.94 in the library.
• Golden master.

Just Playout 5.1.0.GM.1246 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.197. Please refer to separate release notes.

• Golden master.

Just Playout 5.1.0.GM.1245 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.196. Please refer to separate release notes.

• Fixed a bug that resulted in unexpected behaviour after importing a full-day rundown that had warnings (e.g. missing video files).

Just Playout 5.1.0.RC1.1244 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.195. Please refer to separate release notes.

• Resolved a bug that resulted in unexpected behaviour after using “Jump To Next” on a Just Play channel to jump from a gap into a playlist with a default gap playlist defined.

Just Playout 5.1.0.RC1.1243 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.195. Please refer to separate release notes.

• All Apps now show the correct version in the “About…” panel.
• Resolved a bug that resulted in unexpected behaviour after using “Jump To Next” on a Just Play channel to jump from a gap into a playlist with a default gap playlist defined.

Just Playout 5.1.0.RC1.1242 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.195. Please refer to separate release notes.

• Set the minimum deployment target to macOS 12.0 (Monterey). The Apps included with this release will no longer run on versions of macOS older than 12.

• Updated AJA drivers to version 17.0. Please update your system drivers to this version if you are using AJA hardware.

Just Playout 5.1.0.RC1.1241 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.194. Please refer to separate release notes.

• Fixed a bug that resulted in excessive CPU usage when using a Blackmagic Design device.

• Fixed a bug that resulted in distorted audio (“crackling”, “popping”) playing videos on a Just Live channel.

Just Playout 5.1.0.RC1.1240 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.193. Please refer to separate release notes.

• Fixed a bug that resulted in a channel process configured to use an NDI live input source burning 100% CPU (a single core) whenever the source wasn’t available. This is turn could cause other unexpected behaviour such as Just Control being unresponsive or very slow.

• Fixed a bug that resulted in incorrect audio levels for NDI live inputs and output.
• Resolved an issue that showed an incorrect gap between two playlists if the gap was longer than 24 hours.
• Fixed a bug that resulted in the “live” timeline preview (when dragging the timeline) stopping working correctly after previewing a live input.
• The “General” group in the multi-viewer inspector now has an addition pop-up button allowing you to select the timecode shown in the channel’s multi-viewer preview. The available options are “Engine” (same functionality as in previous versions) and “Elapsed” and “Remaining” to show the elapsed or remaining time of the currently airing video. Previously these timecodes could only be shown in the scheduling tab and not in the multi-viewer.
• When opening a Just Play channel’s scheduling tab for the first time on a clean system, the initial timecode shown in the live preview is now the current elapsed time. Previously the main engine timecode was shown, which is not valid for a Just Play channel.

Just Playout 5.0.0.GM.1233 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.192. Please refer to separate release notes.

• Correct audio levels for channels using NDI streams.

Just Playout 5.0.0.GM.1232 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.191. Please refer to separate release notes.

• Improved performance for channels using NDI streams.

Just Playout 5.0.0.RC.1231 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.190. Please refer to separate release notes.

• Updated Blackmagic Decklink drivers to 12.7. If you are using Blackmagic devices, please update your drivers to this version.

Just Playout 5.0.0.RC.1230 Release Notes

• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.189. Please refer to separate release notes.

• Fixed a bug that could result in some items in the library missing their poster frame icons.
• When a channel configured with redundant engines is stopped, the status of the backup engine is now correctly shown as playing (green light) instead of stopped (red light) in Just Control’s configuration panel.
• Updated the “System Checker” App with the latest supported hardware and software versions.
• Updated links in DMG with the updated documentation for this version.
• Improved stability when stopping channels in Just Control.
• Resolved a bug that could result in Just Play’s or Just Live’s scheduling tab “freezing”, meaning that the timeline, library, inspector and workbench views no longer responded correctly to mouse clicks or scrolling.

Just Playout 5.0.0.B1.1229 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.188. Please refer to separate release notes.

• Significantly improved performance searching for a file by name in the library, particularly for repository folders with large numbers of files and/or network attached storage.
• Fixed a bug that could result in audio being lost when looping a video in Just Live.
• In Just Live’s scheduling tab, a clock icon is now shown on the event layer if any timed event rules are defined for the channel.
• Resolved issues that could result in a crash or the file not being played by Just Out when jumping into a very short element (e.g. a gap with just a few frames duration).

Just Playout 5.0.0.B1.1228 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.187. Please refer to separate release notes.

• Fixed a bug that could cause unexpected behaviour in scheduling (restarting an infinite live event) after changing a channel’s settings in the multi viewer inspector (e.g. SimpleFX configuration).
• Fixed an issue that stalled Just Out on startup when NDI was selected in combination with a “psf” video mode.
• After activating a channel with a license key, if the license key doesn’t include an event layer any “timed” event rules previously configured are now automatically removed, and it is no longer possible to add new event rules.
• Resolved a bug that could cause Just Out to stall completely (spinning wheel and no output) when playing out very short files (less than 5 frames long) and/or gap elements.
• ATEM event presets that set the audio balance now set the correct value instead of panning to maximum left or right.
• The “clock” icon shown to the right of the event layer in the timeline to indicate that the channel has timed event rules is now shown independent of whether the event rules are executed on Just Out or Just Connect.
• Fixed a bug when closing a Just Live channel’s scheduling tab that resulted in the channel “viewer” being missing in the multi viewer.
• Just Out now restarts automatically if the pipeline is stalled when the stall occurs during startup. Previously the restart only occurred if the pipeline had started successfully and frames had been played out.
• On channel configured with “Buffered In, video out (default pass-through)” with a live input event scheduled, any other elements (e.g. audio) can now correctly set the live input’s volume.
• Fixed a bug that could result in a few corrupted frames at the beginning of any SD movie on certain Apple Silicon systems.

Just Playout 5.0.0.B1.1227 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.186. Please refer to separate release notes.

• Added a new “Lock multi-viewer drag-and-drop” option to the “General” preferences tab. When activated this prevents channels in the multi-viewer being dragged using the mouse, thus preventing any unwanted changes to the multi-viewer.

• Fixed some minor layout issues in the configuration panel.

• Improved performance and stability when reading VANC data from MXF containers.

• Updated Blackmagic Decklink drivers to 12.6. If you are using Blackmagic devices, please update your drivers to this version.
• Updated Blackmagic ATEM drivers to 9.2.1. If you are using events with an ATEM device, please update your drivers to this version.

Just Playout 5.0.0.B1.1226 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.185. Please refer to separate release notes.

• Updated the demo-mode “watermark blips” to reflect the 2023 Tools On Air product lineup.

Just Playout 5.0.0.B1.1225 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.184. Please refer to separate release notes.

• When configuring a TCP event device, the “+” preset button is now large enough to be clickable.
• When configuring an HTTP event device, there is an addition “PUT” method available in addition to “GET” and “POST”.
• Added a prompt before removing an event rule, or event presets from an event rule.

• When saving a Tools On Air System Profile, any kernel panic files are now included regardless of the version of macOS.

• Updated Blackmagic ATEM drivers to version 9.1. If you are using ATEM device events, please update your system to this version.

Just Playout 5.0.0.B1.1224 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.183. Please refer to separate release notes.

• Updated Blackmagic ATEM drivers to 9.0.2. If you are using ATEM events, please update your system to this version.

• Fixed various spacing issues related to “tables” in the inspector, user preferences and configuration panels in Just Control.

Just Playout 5.0.0.B1.1223 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.1.GM.182. Please refer to separate release notes.

• Updated NDI to version 5.6 for improved stability and performance.
• Fixed a crash in Just Control after selecting either “Ping (QC)” or “TOA Sports Graphic (QC)” from the Template Package in the library. Please note you need to re-install the Template Package from the DMG for these fixes.

Just Playout 5.0.0.B1.1222 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.181. Please refer to separate release notes.

• It is now possible to change the order of any groups by dragging and dropping them in the “Groups” inspector tab.

Just Playout 5.0.0.B1.1221 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.180. Please refer to separate release notes.

• Internal build.

Just Playout 5.0.0.B1.1220 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.179. Please refer to separate release notes.

• Fixed a bug where restarting Just Connect after ending an infinite live event could result in the infinite live event being “resumed”, leading to unexpected behaviour including Just Out playing out nothing or the “filler movie” if defined.

Just Playout 5.0.0.B1.1219 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.178. Please refer to separate release notes.

• Added the 2023 Mac Pro and Mac Studio models to the Tools On Air System Checker.

Just Playout 5.0.0.B1.1218 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.177. Please refer to separate release notes.

• Resolved a bug that could result in the channel viewer’s action (“jump to next”) being disabled during an infinite live event.
• Fixed a bug that could result in the “Channels” menu missing the channel’s actions (e.g. “Jump To Next”) when the channel’s scheduling tab was active.
• Fixed a bug that could result in the “Channels” menu actions  (e.g. “Jump To Next”) being sent to the wrong channel, not the channel with an active scheduling tab.
• When an infinite live event is active, quitting and starting Just Connect no longer results in the live event being “lost” and all Just Out engines “jumping” in the schedule as if the live event had never existed.

Just Playout 5.0.0.B1.1217 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.176. Please refer to separate release notes.

• Fixed a bug that sometimes caused Just Control’s configuration panel to lose focus (behind Just Control’s main window) after stopping a channel.

Just Playout 5.0.0.B1.1216 Release Notes

• This beta release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.175. Please refer to separate release notes.

• If within any given minute Just Out drops more than 50% of the expected frames, it will now automatically restart itself in an attempt to correct any system, network or driver related issues.

Just Playout 5.0.0.A1.1215 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.175. Please refer to separate release notes.

• When scheduling audio files on a Just Play channel using buffered live input, the “live input volume” property now correctly sets the volume of the live input while the audio item is playing.
• If an item (FX, audio or event) is scheduling during an infinite live event but before reaching the scheduled end of the live input, the item will now be played out instead of being ignored.
• Fixed a bug that resulted in any pre-scheduled items (FX, audio or event) during an infinite live event being “lost” (not played out) after changing any of the item’s properties (e.g. duration) once the infinite live event was on air.
• When creating event presets for an ATEM device, there is a new pop-up button to select the event type. In addition to “Switch Video” (the original type of ATEM event), there are three new types: "Set Audio Input Mix Option”, "Set Audio Input Gain" and "Set Audio Input Balance”. These events are all related to the ATEM’s audio mixer. The first sets an audio input’s mix option (on, off or follow video). The second set the input’s gain and the third the input’s balance. An event preset can combine multiple events to set several audio inputs at once.

Just Playout 5.0.0.A1.1214 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.174. Please refer to separate release notes.

• Fixed a bug where after pausing an item in Just Live and changing one or more attributes in the inspector, the item would finish (go off-air) at the originally scheduled time as if it had not been paused.
• For a video item with a “fade out” defined, the video is no longer faded out at the originally scheduled time if the video was paused. The fade out is now performed at the expected time once the video is playing again.
• When an item is on-air in Just Live’s scheduling tab, the item’s start time is shown in the inspector but is now correctly disabled and not editable, as it is not possible to change the start time of a playing item.
• Changing the reference time backwards no longer requires a restart of Just Connect in order to send the correct schedule to Just Out.
• Resolved an issue that caused corrupt video when playing out live input on a channel in SD using buffered input on Apple Silicon systems.
• Fixed a bug that caused unexpected behaviour in Just Control (showing the incorrect playing item) on a channel when Just Out’s master time was behind the reference time and the timecode drift was synchronised between two playlists.

Just Playout 5.0.0.A1.1213 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.173. Please refer to separate release notes.

• When searching larger repositories, or repositories on shared network storage, in Just Play’s or Just Live’s scheduling tab, the search no longer stalls Just Control (“spinning wheel”).
• Added an icon at the far right of the “event” layer in Just Play’s or Just Live’s scheduling tab’s timeline to indicate when a channel has active timed event rules.
• When changing a channel’s failover event rules (by adding or removing event presets or enabling or disabling the rules), the channel viewer in Just Control now automatically reflects the changes without a restart of Just Connect.
• After stopping a channel with a backup engine running, the status of the backup engine in Just Control’s configuration panel correctly shows the engine running instead of stopped.

Just Playout 5.0.0.A1.1212 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.172. Please refer to separate release notes.

• The “Events” tab in Just Control’s configuration panel now has buttons to save all event devices, presets and rules to a single file and then load them again. This makes it easy to transfer events from one system to another.
• Certain event devices (e.g. Bash Script, Apple Script) can now only be added once and not multiple times as this is not necessary and caused issues when adding presets.
• Performance and stability improvements related to NDI.
• Fixed a bug related to passing through SCTE104 VANC packets from the live input to the output.
• Fixed a bug that caused certain movie files that have slightly unusual frame-rates (e.g. 24.9 or 25.1 FPS) to be shown as unplayable in Just Control.
• After changing a channel’s frame-rate and re-connecting the channel, the timecode shown in the channel’s viewer are now correct.
• Resolved a bug that sometimes resulted in a channel’s “action button(s)” in the viewer being disabled.
• Updated the URL for installing Apple’s Pro Video Formats to the latest version.

Just Playout 5.0.0.A1.1211 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.171. Please refer to separate release notes.

• After pausing a video using Just Live’s scheduling tab, resuming the video also resumes the audio.
• When using live input in Just Live with default pass-through, pausing a video no longer results in the live input’s audio being audible.

Just Playout 5.0.0.A1.1210 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.171. Please refer to separate release notes.

• Fixed a crash immediately after starting Just Out.

Just Playout 5.0.0.A1.1209 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.171. Please refer to separate release notes.

• Fixed a bug where the “live preview” in Just Play’s timeline showed a “not playable” icon after dragging and dropping videos in the timeline.
• Stability and performance improvements related to scrubbing the timeline and/or calendar views in Just Play’s scheduling tab.

Just Playout 5.0.0.A1.1208 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.170. Please refer to separate release notes.

• Fixed a bug that required a restart of Just Connect after changing the event presets executed by an event rule (e.g. one of the failover rules).
• Fixed a bug that could cause the connect between Just Connect and Just Out to be lost in regular intervals if an ATEM event device was defined and the ATEM device was offline or unreachable.
• Resolved an issue that meant Just Out was unable to start with certain UHD formats on certain Blackmagic Ultrastudio 4K models, although the specific model supported the specific format.
• This is an internal build for Tools On Air only as there may be unexpected behaviour and/or missing features related to audio output.

Just Playout 5.0.0.A1.1207 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.169. Please refer to separate release notes.

• Updated the AJA drivers to version 16.2.4. If you are using AJA hardware, please update your drivers to this version.
• When NDI is selected as a channel’s device (either when creating a new channel or configuring an existing channel), it is now possible to select one of the “live input” modes. In this case, the channel’s multi-viewer inspector has a additional popup button with all available NDI sources on the network that can be used to specify which NDI source should be used for the channel’s live input.
• This is an internal build for Tools On Air only as there may be unexpected behaviour and/or missing features related to audio output.

Just Playout 5.0.0.A1.1206 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.168. Please refer to separate release notes.

• Fixed a bug that could cause corrupt audio output on AJA devices.
• When NDI is selected as a channel’s device (either when creating a new channel or configuring an existing channel), 10-bit video formats are no longer offered as NDI only currently supports 8-bit video formats.
• This is an internal build for Tools On Air only as there may be unexpected behaviour and/or missing features related to audio output.

Just Playout 5.0.0.A1.1205 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.167. Please refer to separate release notes.

• Any VANC data (Closed Captions, OP47, SCTE-104) will now be sent over NDI, so for example a just:in Mac channel can receive and record the VANC data. Note that due to missing standardisation, this will only work with ToolsOnAir solutions such as just:in Mac.
• This is an internal build for Tools On Air only as there may be unexpected behaviour and/or missing features related to audio output.

Just Playout 5.0.0.A1.1204 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.166. Please refer to separate release notes.

• Fixed a bug that could result in the NDI output stream failing to start, particularly on Apple Silicon based Macs.
• This is an internal build for Tools On Air only as there may be unexpected behaviour and/or missing features related to audio output.

Just Playout 5.0.0.A1.1203 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.165. Please refer to separate release notes.

• When creating a new channel or setting the engine properties on an existing channel, there is a new option for NDI stream output. This allows the output from the channel to be received and viewed by any compatible NDI device or software.
• This is an internal build for Tools On Air only as there may be unexpected behaviour and/or missing features related to audio output.

Just Playout 5.0.0.A1.1202 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.164. Please refer to separate release notes.

• Fixed a bug that could result in the channel viewer action button(s) being disabled after starting Just Control, making it impossible to open the scheduling tab or jump to the next clip.
• When importing a text-based playlist in Just Play’s scheduling tab, if a duration column is specified and a placeholder is added due to the media being missing, the placeholder’s duration is now set to the duration specified in the text file.
• When using an AJA Io4K Plus device, 12G input and output is now supported up to 2160p60. Note that buffered input is supported for UHD, but DSK is not due to hardware limitations.
• This is an internal build for Tools On Air only as there may be unexpected behaviour and/or missing features related to audio output.

Just Playout 5.0.0.A1.1201 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.163. Please refer to separate release notes.

• Audio output is now enabled again when using an AJA device with a DSK live input mode.
• Fixed a bug where audio was missing after using “jump to next” in Just Play.
• Fixed a bug where audio was missing playing out a video in Just Live.
• Fixed a bug where audio wasn’t played in sync when looping a video in Just Live.
• Fixed a crash in Just Control when a looped video was selected during playout.
• This is an internal build for Tools On Air only as there may be unexpected behaviour and/or missing features related to audio output.

Just Playout 5.0.0.A1.1200 Release Notes

• This alpha release of Just Play and Just Live 5.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a 5.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.162. Please refer to separate release notes.

• Removed references to specific System Preferences tabs in the Tools On Air System Checker, as these now vary between major releases of MacOS.
• Added the latest 2022 Mac mini modes to the Tools On Air System Checker.
• Updated all copyright notices to 2023.
• This is an internal build for Tools On Air only as there may be unexpected behaviour and/or missing features related to audio output.

Just Playout 4.2.0.GM.1109 Release Notes

• This version requires a 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.159. Please refer to separate release notes.

• Fixed a bug that caused timed event rules with SCTE104 presets to duplicate their operations, resulting in unexpected SCTE104 payloads.

Just Playout 4.2.0.A1.1108 Release Notes

• This alpha release of Just Play and Just Live 4.2.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.159. Please refer to separate release notes.

• Updated the AJA drivers to version 16.2.3. If you are using AJA hardware, please update your drivers to this version.
• When importing CSV playlists to a Just Play channel with a column specified for the duration, the value in the CSV data will now be used in the resulting playlist instead of the media’s duration.
• When importing CSV playlists to a Just Play channel, any missing files are now logged correctly in the import window, and placeholder clips are inserted into the resulting playlist.
• After clicking the “jump to next” action button for a Just Play channel, the action button is now disabled for 2 seconds, preventing unexpected behaviour.

Just Playout 4.2.0.A1.1107 Release Notes

• This alpha release of Just Play and Just Live 4.2.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.159. Please refer to separate release notes.

• Fixed a bug that resulted in lines 2 and 3 of any FX (including still images) being erased (black).

Just Playout 4.2.0.A1.1106 Release Notes

• This alpha release of Just Play and Just Live 4.2.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.159. Please refer to separate release notes.

• Fixed a bug that sometimes resulted in the channel’s viewer being missing in the multi-viewer after the channel’s scheduling tab was closed automatically, for example after stopping the channel or quitting Just Connect.

Just Playout 4.2.0.A1.1105 Release Notes

• This alpha release of Just Play and Just Live 4.2.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.159. Please refer to separate release notes.

• Fixed a bug that resulted in timed daily event rules scheduled on Just Out being delayed by the size of Just Out’s buffer. For example, an event scheduled at 10:00:00 with a buffer of 2 seconds would be triggered at 10:00:02.

Just Playout 4.2.0.A1.1104 Release Notes

• This alpha release of Just Play and Just Live 4.2.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.158. Please refer to separate release notes.

• When adding or removing presets from an event rule, the selection “focus” of the rule is not lost, meaning the rule remains selected after making the change.
• Fixed a bug that meant that any newly created event presets could not be added to an event rule until a restart of Just Control.
• Resolved an issue that resulted in Just Control showing a channel to be running even after stopping all of its engines.
• Fixed a bug that resulted in any failover event rules not being executed when stopping a channel.

Just Playout 4.2.0.A1.1103 Release Notes

• This alpha release of Just Play and Just Live 4.2.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.157. Please refer to separate release notes.

• Timed event rules may now be scheduled on Just Connect and Just Out.
• Timed event rules can now be disabled to prevent them being executed without needing to remove them, and they can be re-enabled later.
• Failover conditional event rules can now be changed (presets added or removed) without requiring a restart of Just Connect.
• Fixed a bug that resulted in newly added HTTP or TCP event devices requiring a restart of Just Out.
• When configuring timed event rules by second, minute or hour, it is no longer possible to enter zero for the frequency, and there is a sensible maximum value allowed.
• When editing Bash Script or Apple Script event presets, the view for editing the scripts is now significantly larger for easier editing of longer scripts.

Just Playout 4.2.0.A1.1102 Release Notes

• This alpha release of Just Play and Just Live 4.2.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.156. Please refer to separate release notes.

• Fixed a bug that sometimes prevented event presets being added to an event rule in the “Rules” tab.
• For failover conditional event rules it is now only possible to select “Just Connect” for “Execution” as Just Out cannot execute failover related events.
• The failover status is shown in Just Control assuming that at least one event preset has been selected for one of the failover event rules.

Just Playout 4.2.0.A1.1101 Release Notes

• This alpha release of Just Play and Just Live 4.2.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.155. Please refer to separate release notes.

• The “Events” tab now has a third “sub-tab” called “Rules” in addition to existing “Devices” and “Presets” tab. Once you have defined one or more event devices and one or more event presets the “Rules” tab can be used to define which presets should be executed under certain conditions or rules. Currently two types of rule are supported: “conditional” and “timed”. Conditional rules are executed when a specific condition occurs, one example is a specific failover state. Timed rules can be executed every few seconds, minutes or hours, or at a specific time each day.
• The “Failover” tab has been removed as this functionality is now found in the new “Rules” tab in “Events” (see above).

Just Playout 4.2.0.A1.1100 Release Notes

• This alpha release of Just Play and Just Live 4.2.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.154. Please refer to separate release notes.

• Due to changes in macOS, the End User License Agreement (EULA) is no longer shown when mounting the DMG but instead when launching the individual applications for the first time. You must agree to the terms of the EULA before the application starts.

Just Playout 4.1.0.GM.1086 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.153. Please refer to separate release notes.

• Fixed a memory leak in Just Control that could result in all of the system RAM being consumed after a few days and Just Control to crash or be suspended by the system.
• Updated the “Name Lower Third with XML” Quartz Composer template in the Template Package.
• Resolved a crash in Just Control after selecting the playlist timeline track in Just Play or Just Live’s scheduling tab.

Just Playout 4.1.0.GM.1085 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.152. Please refer to separate release notes.

• On older legacy AJA hardware the VANC area is now set to SMPTE legal black to ensure compatibility with downstream equipment.

Just Playout 4.1.0.GM.1084 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.151. Please refer to separate release notes.

• All VANC related features (CEA 608/708 Closed Captions, OP-47 Subtitles, SCTE 104) are now supported on older legacy AJA hardware (e.g. LHe+).
• Fixed a crash in Just Out that could sometimes occur when starting playout of a file.
• When configuring a “Splice Request” SCTE 104 event preset, the “Splice Insert Type” popup button now correctly show’s the preset’s current insert type.

Just Playout 4.1.0.GM.1083 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.150. Please refer to separate release notes.

• Resolved memory leaks in Just Control related to the network connection to the channel being lost and then restored.

Just Playout 4.1.0.GM.1082 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.149. Please refer to separate release notes.

• Fixed a bug that sometimes resulted in Just Control crashing when using a shared network repository that was disconnected while using Just Control.

Just Playout 4.1.0.GM.1081 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.148. Please refer to separate release notes.

• Fixed a bug that sometimes resulted in Just Control crashing when using a shared network repository that was disconnected or offline when starting Just Control.

Just Playout 4.1.0.GM.1080 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.147. Please refer to separate release notes.

• Fixed a bug that sometimes resulted in Just Control crashing when using a shared network repository that was disconnected or offline when starting Just Control.

• Updated Blackmagic Design Decklink drivers to 12.4.2, please install this version if you are using Blackmagic Design devices.

Just Playout 4.1.0.GM.1079 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.146. Please refer to separate release notes.

• Fixed a bug that sometimes resulted in Just Control consuming a lot of CPU time, particularly when connecting to multiple channels.

Just Playout 4.1.0.GM.1078 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.145. Please refer to separate release notes.

• Updated Blackmagic Design Decklink drivers to 12.4.1, please install this version if you are using Blackmagic Design devices.
• Files in the library that already have metadata sidecar XMLs are now “active” (selectable, draggable) much faster than previously, particularly on shared network storage.
• When the mouse exits the library or inspector preview views, the overlays are now hidden even if the previewed item is currently playing.
• Fixed a bug that resulted in all “standard” attributes (colour, SimpleFX control, sync-point) being lost when replacing a placeholder with media, either in Just Control by dropping media on the placeholder or automatically by copying media with the correct name to the repository folder.

Just Playout 4.1.0.B1.1077 Release Notes

• This beta release of Just Play and Just Live 4.1.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.144. Please refer to separate release notes.

• An error is now displayed in the channel’s multi-viewer inspector in the “Errors and warnings” group if a placeholder is played out (not replaced with an asset) or if an item’s asset is missing for movie, audio and FX items.
• Improved performance while refreshing a playlist in Just Control.

Just Playout 4.1.0.B1.1076 Release Notes

• This beta release of Just Play and Just Live 4.1.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.143. Please refer to separate release notes.

• When setting up a new playout device for the first time, if the Just Control user name is not the same as the current macOS login user name, both are included in the channel’s default users.
• Improved performance when opening a Just Play channel’s scheduling tab for the first time, particularly if the channel’s schedule has many short videos.
• Fixed a bug that could result in the “device” status in the “Connections” tab in the multi-viewer showing red and the channel yellow although the channel in the multi-viewer was connected and showing a live preview.
• Fixed a bug that could result in a channel being missing in the multi-viewer after the channel’s scheduling tab was closed due to a connection error while Just Control was in the “background” (not the “active” application).

Just Playout 4.1.0.B1.1075 Release Notes

• This beta release of Just Play and Just Live 4.1.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.142. Please refer to separate release notes.

• Improved performance in Just Control (no “spinning wheel”) when using a repository folder with many tagged files, particularly an attached (network) storage.
• Improved performance and lower CPU-usage in Just Play’s scheduling tab when viewing a channel with very long (e.g. 24h) playlists.
• Fixed a bug that could sometime prevent a channel being started in Just Control after it had previously been stopped.

Just Playout 4.1.0.B1.1074 Release Notes

• This beta release of Just Play and Just Live 4.1.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.141. Please refer to separate release notes.

• The error alert shown by Just Connect when it fails to bind to the communication socket has been improved to show the relevant information depending on the version of macOS, and added correct information related to AirPlay Receiver when running on macOS Ventura (13).
• Added macOS Ventura (13) to the ToolsOnAir System Checker along with correct information related to AirPlay Receiver.
• Removed all versions of macOS 10 (e.g. 10.15, 10.14, 10.13 etc.) from the the ToolsOnAir System Checker as these versions of macOS are no longer supported by the current release of ToolsOnAir software.
• The naming used in “Stay Alive” on the ToolsOnAir System Preferences Pane have been updated to be consistent with other ToolsOnAir documents.

Just Playout 4.1.0.B1.1073 Release Notes

• This beta release of Just Play and Just Live 4.1.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.140. Please refer to separate release notes.

• Resolved a bug where the “option” key to load and play an item in the workbench was active at the same time as the workbench preview, so for example using “option-i” to jump to the in-point would at the same time load and play the item. Now, using “option” to load and play an item is only active when the workbench explicitly has the keyboard focus.

Just Playout 4.1.0.B1.1072 Release Notes

• This beta release of Just Play and Just Live 4.1.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.139. Please refer to separate release notes.

• Fixed a bug that prevented keyboard input working correctly when using Just Live’s workbench preview on certain versions of macOS.
• Fixed some visual issues in Just Live’s workbench preview.
• When using the "i" or “o” keys to set the in- or out-point in Just Live’s workbench preview, the selected item in the workbench is now correctly updated and the new duration is displayed.

Just Playout 4.1.0.B1.1071 Release Notes

• This beta release of Just Play and Just Live 4.1.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.138. Please refer to separate release notes.

• Resolved a bug that could result in Just Live’s workbench preview no longer responding (playing video) after switching to the full-screen trimmer and back.
• Added additional keyboard shortcuts to Just Live’s workbench preview to enable setting or jumping to the in- or out-point. Please refer to the user manual for further details.
• Fixed minor visual issues related to Just Live’s workbench preview.
• Added additional logging to Just Out’s log related to Infinite and SimpleFX.

Just Playout 4.1.0.B1.1070 Release Notes

• This beta release of Just Play and Just Live 4.1.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.137. Please refer to separate release notes.

• When executing an “Insert Segmentation Descriptor Request” SCTE-104 event with an event ID of zero, the event number is now correctly incremented each time the event is executed.
• When executing an “Insert Segmentation Descriptor Request” SCTE-104 event the duration is now correctly sent in seconds as specified by the standard documentation.
• When previewing an item in Just Live’s workbench, the preview has been re-designed to allow for video trimming directly in the preview rather than needing to switch to the full-screen video trimmer.

Just Playout 4.1.0.B1.1069 Release Notes

• This beta release of Just Play and Just Live 4.1.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.136. Please refer to separate release notes.

• When creating a new channel or setting an existing channel’s output format, you can now select from “psf” (progressive segmented frame) formats. In addition, there is a “Render psf as progressive, not interlaced” channel option. When selected, pst25 will be rendered as 25 full frames per second. When not selected, psf25 will be rendered as 50 frames per second interlaced to 25 frames per second.

Just Playout 4.1.0.B1.1068 Release Notes

• This beta release of Just Play and Just Live 4.1.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.135. Please refer to separate release notes.

• Fixed a bug that caused a “growing” movie item on Just Live’s workbench to remain “growing” even after the library showed the same file as no longer growing.
• The “Codec” column in the library now shows the full name of the codec when available instead of the 4-character-code.
• Resolved a bug that sometimes resulted in the library incorrectly showing “growing” movies as no longer growing on certain storage systems.
• If the output device is “lost” during playout (e.g. a device connected via thunderbolt when the cable is disconnected or the device loses power), Just Out now restarts automatically, the channel is shown as “offline” in Just Control and an error is displayed. Once the device is restored, Just Out will automatically resume playing.
• When creating SCTE 104 event presets, there is a new “Splice Null Request” option.
• After playing out an “Infinite Live Event”, the As-Run-Log now shows the correct duration for the live event instead of the originally scheduled duration.

Just Playout 4.1.0.B1.1067 Release Notes

• This beta release of Just Play and Just Live 4.1.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.134. Please refer to separate release notes.

• Added a new preference to the “Playout” preferences in Just Control to enable synchronising a movie’s in-point and poster frame. When enabled, after trimming a scheduled movie the poster frame is automatically set to the new in-point.
• It is now possible to preview and trim growing movie files both in the library for scheduled items (e.g. in Just Live’s workbench). While the movie is selected but not “loaded” in the preview (only showing the poster frame), the overlay will show the clip’s current duration as it grows. Once “loaded” (e.g. after playing the movie), the movie will no longer update automatically and you can only preview/play the clip up to the duration when you started playing the movie.
• After dropping a growing file onto Just Live’s workbench and setting its in-point using the trimmer, the poster frame shown in the preview reflects the movie’s current poster frame. If you drop the same clip several time onto the workbench, each individual clip may now have a different poster frame.

Just Playout 4.5.0.A1.1066 Release Notes

• This alpha release of Just Play and Just Live 4.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.133. Please refer to separate release notes.

• When previewing a graphic in the library that has a “custom HTML control interface” defined, the custom interface is now shown in a separate window. When such a graphic is on-air, the custom interface is also shown, or can be opened by selecting the graphic in the schedule and clicking the “Open” button in the inspector’s “Custom Interface” group.
• All event related attributes (e.g. “Start Event”) and the “Events” tab in the library are no longer shown for channels that do not have an event layer.

Just Playout 4.5.0.A1.1065 Release Notes

• This alpha release of Just Play and Just Live 4.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.132. Please refer to separate release notes.

• When a channel with “Failover Control” activated is stopped in Just Control, the channel now first switches to the “REDUNDANT” state, including firing any defined events. This will remain the failover state until the channel is restarted.

Just Playout 4.5.0.A1.1064 Release Notes

• This alpha release of Just Play and Just Live 4.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.131. Please refer to separate release notes.

• The “Show Metadata” menu item in the scheduling tab’s “View > Workbench Columns” menu is now disabled if the channel does not have any metadata fields defined.
• Any change to the “Auto-hide colour” for an Infinite FX layer is now applied immediately and no longer requires a restart of Just Control and Just Connect.
• When looping a video in Just Live, any Simple FX settings for the video are respected for as long as the video in on air, not just the first time the video is played out.
• When two playlists are scheduled in Just Play with a gap between them, any Simple FX settings for the first video in the second playlist are applied at the correct time instead of when the last video in the first playlist finishes.

Just Playout 4.5.0.A1.1063 Release Notes

• This alpha release of Just Play and Just Live 4.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.131. Please refer to separate release notes.

• When using Just Control with multiple channels that have different playlist repository folders defined, each channel’s scheduling tab now shows the correct playlist repositories in the library’s playlist tab.

Just Playout 4.5.0.A1.1062 Release Notes

• This alpha release of Just Play and Just Live 4.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.130. Please refer to separate release notes.

• Fixed a crash after copying and pasting a folder in Just Live.
• Non-video items (e.g. FX, audio and event items) no longer have “SimpleFX control” properties in the inspector. Note that this only applies to newly dropped items, items already scheduled in playlists previous to this build may still have these properties.
• The “Fade In” and “Fade Out” properties in the channel’s multi-viewer inspector are now disabled for InfiniteFX and enabled for SimpleFX.
• Changes to the “Fade In” and “Fade Out” SimpleFX properties no longer require a restart of Just Out in order to take effect.
• The “Hidden Timeline Layers” settings are now saved and restored between sessions (after quitting and re-staring Just Control).

Just Playout 4.5.0.A1.1061 Release Notes

• This alpha release of Just Play and Just Live 4.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.129. Please refer to separate release notes.

• Fixed issues with timecode overlays in Just Control after changing timecode mode or resizing the multi-viewer.
• It is now possible to rename event device configurations. This may be necessary if you have two or more event devices using the same device to prevent them having the same name.

Just Playout 4.5.0.A1.1060 Release Notes

• This alpha release of Just Play and Just Live 4.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.128. Please refer to separate release notes.

• Fixed a bug that caused Bash or Apple script events that included comma characters in the script to fail when editing in Just Control or executing in Just Out.
• Just Control now uses Metal for rendering all of the overlays (e.g. timecode and audio bars) for improved performance and to ensure compatibility with future releases of macOS.

Just Playout 4.0.0.GM.1048 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.127. Please refer to separate release notes.

• Resolved an issue that resulted in a user-interface glitch in Just Control when configuring HTTP events.

Just Playout 4.0.0.RC.1047 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.126. Please refer to separate release notes.

• The buttons in Just Live’s timeline to hide an FX layer are now visible again.
• The “Remaining” timecode menu items in Just Live’s timecode menu are now enabled and selectable.

Just Playout 4.0.0.RC.1046 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.126. Please refer to separate release notes.

• When previewing a file in the library that is currently growing, the preview is marked “Growing file - no preview”. Once the file stops growing, the preview is now automatically updated to allow previewing of the final file.

• Fixed a bug that resulted in all graphics on all FX and SimpleFX layers being removed for the duration of the currently playing video after changing anything related to the layer in the multi-viewer inspector (e.g. changing or removing the file playing on a layer).

Just Playout 4.0.0.RC.1045 Release Notes

• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.125. Please refer to separate release notes.

• It is no longer possible to drag items in a locked playlist in the workbench or timeline. Previously it was possible to drag items out of a locked playlist, or change the order within a playlist, even though it was locked.
• Added three new timecode modes to the live viewer in Just Play and Just Live’s scheduling tab: “Small Remaining”, “Medium Remaining” and “Large Remaining”. These modes display a single timecode with the current remaining timecode from the playing video item, if available.

Just Playout 4.0.0.B1.1044 Release Notes

• This beta release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.124. Please refer to separate release notes.

• Removed the option to add a new “Workflow Repository” folder to a channel engine.

Just Playout 4.0.0.A1.1043 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.123. Please refer to separate release notes.

• Fixed a bug that prevented the live preview in the multi-viewer re-connecting after stopping and starting Just Out on a single engine channel.
• Added Mac Studio models with M1 Max and M1 Ultra to the support devices in TOA System Checker.

Just Playout 4.0.0.A1.1042 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.123. Please refer to separate release notes.

• Significantly better performance using the library, particularly when using shared network storage and/or folders with a large number of files.
• Resolved a bug that could cause the application to lock (“Spinning Wheel”) in certain circumstances, for example when copying files to a shared network storage while viewing the same storage in the library.

Just Playout 4.0.0.A1.1041 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.122. Please refer to separate release notes.

• Fixed a bug that sometimes resulted in the SimpleFX status shown in the timeline (both for Just Play and Just Live’s scheduling tabs) not matching the actual status of the SimpleFX elements shown on the channel’s output.
• When fading SimpleFX elements in or out, the fades are now correct, previously they were visually incorrect (colours in the elements were fading to black instead of becoming transparent).

Just Playout 4.0.0.A1.1040 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.122. Please refer to separate release notes.

• When a channel that is in “2N Redundancy mode” is stopped, all backup engines are no longer automatically stopped but instead left to run while all main engines are stopped. Although the backup engines will no longer receive updates, this means that they can usually run for another 4-8 hours (depending on the scheduled items) without “going black”. Once the channel is started, all main engines should automatically resume playing, and once they are fully configured all backup engines will automatically restart in order to receive the updated configuration. This means that in a “2N Redundancy” configuration changes can be made to the channel without an interrupted signal.
• The live channel preview in the multi-viewer and scheduling tab now switches automatically between running main and backup engines, so that stopping a main engine no longer results in the preview stopping. As long as at least one engine is running, the preview in Just Control should always show a live stream.
• Updated the links in the DMG for the new v4 documents.
• When using “jump to next” in Just Play, the As Run Log now correctly shows both the scheduled (original) duration and the duration actually played out.
• For channels with backup engines, after using “jump to next” in Just Play, the As Run Log now correctly shows both the scheduled (original) duration and the duration actually played out. Note that the duration will be slightly longer for backup engines compared to main engines.
• After upgrading a channel from a previous version to use the new “SimpleFX” feature, any pre-scheduled playlists or saved playlists that are dropped into the schedule are now correctly updated to have the correct information related to SimpleFX.
• When generating a System Profile, “.ips” crash reports generated by newer versions of macOS are now included.

Just Playout 4.0.0.A1.1039 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.121. Please refer to separate release notes.

• Added an additional warning underneath many of the tabs in the configuration panel that the channel or channels must be stopped before changes can be made.

Just Playout 4.0.0.A1.1038 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.120. Please refer to separate release notes.

• Fixed a bug that caused changes to the SimpleFX or InfiniteFX fade in/out parameters not to be saved.
• The “Hidden Timeline Layers” in the “View” menu in Just Play and Just Live’s scheduling tab now includes the SimpleFX layer if the channel has one.
• The status of the SimpleFX “Live Bug” is now correctly shown in Just Live’s scheduling tab depending on the active mode selected for the channel.
• Fixed a bug that caused logs from a channel’s active engines to be missing from a system profile.
• When creating a system profile, the option to exclude files older than a given period is now respected for logs and files from a channel’s active engines.
• When creating a system profile, the option to remove any excluded (older) logs and files is now respected.
• When creating a system profile, crash reports and other relevant files from a channel’s active engines are now included, not just the log files.
• When creating a system profile, logs and files sent from a channel’s active engines are now first compressed, making the process to collect the system profile significantly faster.
• In the channel’s scheduling tab’s inspector, only relevant options for the SimpleFX Layer Control are presented. For example, if the channel does not have a “Live Bug” defined, the option to disable the bug will not be shown in the inspector.

Just Playout 4.0.0.A1.1037 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.119. Please refer to separate release notes.

• Fixed a bug that causes audio items to begin playing immediately when releasing an “infinite” live event, even if the audio item was scheduled to start some time after the live event.
• After logging into Just Control, any multi-viewer inspector groups that are “collapsed” now have the correct icon next to the title and correctly expand when clicked.
• Added a new “Heartbeat timeout” property to the engine configuration panel. This allows you to specify a longer timeout that is used to detect that Just Out has stopped sending heartbeats and should be disconnected. This may be relevant when using failover control when network issues may sometimes cause heartbeats to drop out for a few seconds.
• After changing the “auto-hide Finder colour” of an FX or SimpleFX layer, the change is now immediately shown in the scheduling tab without needing to restart Just Control and/or Just Connect.
• When an “auto-hide Finder colour” is defined for a SimpleFX layer, dropping a movie into the timeline with the same Finder tag defined now automatically disables the channel “bug” for the movie.

Just Playout 4.0.0.A1.1036 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.118. Please refer to separate release notes.

• When a “default gap movie” is defined, it is now only played out when either a) a placeholder is on-air (that was never updated with media), or b) a movie is scheduled but the asset is missing or unreadable. In the case that a gap is scheduled in a playlist, or nothing is scheduled, either nothing will be played out, or the “default gap playlist” if one is defined for the channel.
• Fixed a bug where changing the attributes of a graphic at the “last minute” (a few seconds before it was scheduled to play out) caused the graphic to begin playing immediately (too early).
• Removed spurious logs playing out a movie where the asset was missing.
• In the “As Run Log”, a movie where the asset was missing is now correctly logged as “Not Aired” (if no “default gap movie” is defined for the channel), or “Filler Aired” if the channel’s “default gap movie” was played out instead.

Just Playout 4.0.0.A1.1035 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.117. Please refer to separate release notes.

• Fixed a bug that caused the “locked” / “unlocked” icon in the multi-viewer’s inspector to show the incorrect image at times (e.g. locked when the inspector was unlocked, or vice-versa).
• When logging out or quitting Just Control, the “locked” state of the multi-viewer’s inspector is now saved and restored when the user is logged back in.
• When logging out or quitting Just Control, the “collapsed” state of each group in the multi-viewer’s inspector is saved and restored when the user is logged back in. This means you can collapse groups that you rarely use to “tidy up” the inspector, and these groups will remain collapsed each time you log back into Just Control.

Just Playout 4.0.0.A1.1034 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.116. Please refer to separate release notes.

• Fixed issues related to activating a license key and redundant playout and failover control.
• Fixed a bug that prevented keyboard input (JKL, space) working correctly when previewing or trimming video on macOS 12.
• It is now possible to trigger actions in Just Control via GPI (Service USB device). Please contact Tools On Air support directly if you want to use this feature.

Just Playout 4.0.0.A1.1033 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.115. Please refer to separate release notes.

• Fixed issues not showing the correct colour in the library after adding or removing Finder “tags”.
• Fixed visual issues in the workbench and timeline related to “gap” items in a playlist.
• Fixed visual issues in some of the library tabs (e.g. Playlists, Events) running on macOS 11 and higher.
• Fixed a bug when creating Apple Script or Bash Script presets where the list of script variables showed metadata for just:in instead of Just Out and Just Connect.
• It is now possible to create TCP and HTTP events and presets with Just Out or Just Connect metadata used for the query parameters.

Just Playout 4.0.0.A1.1032 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.114. Please refer to separate release notes.

• When creating a SCTE-104 VANC event, there are now three commands available: “Splice Request” (this was previously available), “Time Signal Request” and “Insert Segmentation Descriptor Request”. In addition, multiple SCTE-104 commands may be combined in a single preset, and these will be grouped together into a single VANC packet.
• Fixed a bug where images (e.g. JPG, PNG) scheduled on an FX layer were played out “black” (colour information “missing”).

• Fixed the visual style of the “Folders” list in Just Live’s scheduling tab running on macOS 11 or higher.
• When locking the inspector in the multi-viewer, the new playout groups are now also locked (“General”, “Users”, “Gaps”, “Watch Folder”, “User Interfaces”, “FX Layer”, “SimpleFX”).
• It is now possible to add Audio and SimpleFX layers to a licensed channel as these are not restricted by the license code.

Just Playout 4.0.0.A1.1031 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.113. Please refer to separate release notes.

• Resolved an issue that resulted in some files with an SRT sidecar not displaying subtitles correctly or at all.
• Added support for <line>…</line> and <font color=“”>…</font> formatting markup in SRT sidecars.
• Added a “Timecode Type” setting in the channel settings for SRT and EBU-STL sidecars, with options for “elapsed” (I.e. the timecode from the start of the video) or “media” (i.e. taking into account the media’s start timecode, if defined). The default for both sidecars is elapsed timecode.

Just Playout 4.0.0.A1.1030 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.112. Please refer to separate release notes.

• Resolved an issue that resulted in some files with an EBU-STL sidecar not displaying subtitles correctly or at all.

Just Playout 4.0.0.A1.1029 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.111. Please refer to separate release notes.

• Fixed issues with the channel preview.

Just Playout 4.0.0.A1.1028 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.110. Please refer to separate release notes.

• Fixed the visual style of the “Folders” list in Just Live’s scheduling tab running on macOS 11 or higher.
• Fixed a bug that resulted in the “Infinite FX” tab in Just Play’s and Just Live’s inspector being missing.
• When logging into Just Control with an unknown user for a playout channel, adding the user to the channel required a restart of Just Control and Just Connect. This has been resolved.

Just Playout 4.0.0.A1.1027 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 4.0 license code, invalidating any older license codes. If you already have a valid license code for a previous version, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.110. Please refer to separate release notes.

• The “Activation” tab in the configuration panel now shows the status for Failover Control.
• After entering a valid license key, the status now includes warning about VANC data and Failover Control if these are not included in the license options.
• Once a channel is licensed, it is no longer possible to activate Failover Control if the license does not include this option.
• After entering a valid license key, any “backup” engines are removed from the channel if the license options do not include redundancy.
• After a channel is licensed, it is no longer possible to add or remove layers from the channel, even if the license is temporary.
• After “resetting” Just Connect (removing any channels) and adding a new channel, any active license is applied to the new channel.
• The channel’s preview in multi-viewer now functions correctly for graphics-only channels (channels without a video layer).
• The As-Run-Log now correctly logs Gap and Placeholder items as “Aired Gap” and “Aired Placeholder” respectively instead of just “Aired”.
• After clicking the “Now” button in Just Play’s scheduling tab, the “sync-point” information above the timecode is correctly updated to reflect the changed time.
• For “infinite” live events, the “fade out” property is now automatically turned off and disabled as fade outs are not supported for infinite live events.
• When updating a placeholder item with media, time is now “inserted” or “deleted” from the schedule depending on whether the media is shorter or longer than the placeholder. This will “move” any scheduled items during or after the placeholder (e.g. graphics).
• When refreshing the library, any “Finder” tag colours are also correctly refreshed.
• Fixed a bug that sometimes resulted in the “Finder” tag colour shown for an item in the library remaining after the tag had been removed in Finder.

Just Playout 4.0.0.A1.1026 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.0.GM.109. Please refer to separate release notes.

• The workbench columns for the Simple FX layer control show “-“ instead of “Off” when the element is hidden.
• Fixed a bug right clicking on an item in the “Events” library tab that could lead to unexpected behaviour.
• Added a new “FX Layer” group to the multi-viewer’s inspector to control the settings of a given FX Layer (e.g. “Infinite FX”). This can now be changed without needing to stop the channel first.

• Added a new “SimpleFX” group to the multi-viewer’s inspector to control the settings of a given Simple FX Layer (e.g. the images used for the channel or live bug). This can now be changed without needing to stop the channel first.
• Added a new “Users” group to the multi-viewer’s inspector to control the users allowed to access the channel, the rights that the users have and their passwords. This can now be changed without needing to stop the channel first.
• Added a new “User Interfaces” group to the multi-viewer’s inspector to control the individual instances of Just Control that are allowed to access the channel. This can now be changed without needing to stop the channel first.
• The settings in the “Events” tab in the configuration panel (event devices and presets) can now be changed without needing to stop the channel first.

Just Playout 4.0.0.A1.1025 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.0.GM.108. Please refer to separate release notes.

• Fixed a bug that prevented changes in the inspector’s “Infinite Graphics” tab being executed by Just Out.
• Added a new “General” group to the multi-viewer’s inspector to control the number of audio channels shown in the channel’s multi-viewer preview. This can now be changed without needing to stop the channel first.

• Added a new “Gaps” group to the multi-viewer’s inspector to control a channel’s default gap playlist and default gap movie. These settings can now be changed without needing to stop the channel first.

• Added a new “Watch Folder” group to the multi-viewer’s inspector to control a channel’s watch folder settings. These settings can now be changed without needing to stop the channel first.

Just Playout 4.0.0.A1.1024 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.0.GM.107. Please refer to separate release notes.

• Placeholder and Gap items now have the same Simple FX settings as video items when dropped into a playlist.
• When adding a new device to Just Control, a check is made if the device already exists to prevent two identical devices.
• Fixed a bug that prevented “Split playlist here” in the workbench context menu working in Just Play’s scheduling tab.
• Added an additional “Gap After”  status a playlist where a gap exists before the next playlist. This is shown at the bottom of the playlist.
• Resolved a bug that resulted in metadata sets from just:in mac or linux being incompatible with Just Play and Just Live (the “root” XML tag is now “metadataSet” instead of “metadataset”).
• Fixed a bug that sometimes resulted in the metadata columns being missing from the workbench in Just Play or Just Live’s scheduling tab.
• The state of the metadata columns in Just Play or Just Live’s scheduling tab (hidden or visible and the equivalent menu items) are now correctly restored after quitting and restarting Just Control.
• When dropping a folder from the library or Finder onto the scheduling tab, the contents of the folder are first sorted alphabetically before adding the items to the schedule.
• The library views in Just Play or Just Live’s scheduling tab now have an additional “Length (In-Out)” column to show the length of a video between the defined in- and out-points. In case this is different to the video’s original length, the length is marked in yellow.

Just Playout 4.0.0.A1.1023 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.0.GM.106. Please refer to separate release notes.

• Fixed a bug that resulted in certain columns in the workbench (e.g. Infinite Graphics Layer Control) not being correctly restored when opening the scheduling tab.
• Added Infinite Graphics Layer Control columns to the workbench in Just Live’s scheduling tab.
• When using an image in an infinite graphics layer, fading in and out is now supported when hiding the layer while a video is on air.
• For new channels, there is a new “Simple FX” option that adds a new type of graphics layer capable of displaying two static images, one for the channel bug and a second “live” bug when the live input is on air.

Just Playout 4.0.0.A1.1022 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.0.GM.105. Please refer to separate release notes.

• When playing out videos with CEA closed captions, captions are cleared when a video finishes, also when “jump to next” is used to jump immediately to the next video.
• Fixed inconsistent VANC lines playing out CEA closed captions on AJA and Blackmagic cards.
• OP-47 teletext subtitles are now supported by Just Out in addition to CEA closed captions. Playout of captions or subtitles is also now indicated in the multi-viewer, Just Play and Just Live interfaces.
• The following subtitle and closed caption containers are now supported:
• CEA closed captions embedded in a MOV track.
• CEA closed captions embedded in a MXF data track.
• CEA-608 closed captions in a SCC sidecar.
• CEA-708 closed captions in a MCC sidecar.
• CEA-708 closed captions in a SRT sidecar.
• OP-47 teletext subtitles embedded in a MXF data track.
• OP-47 teletext subtitles in a EBU-STL sidecar.
• OP-47 teletext subtitles in a SRT sidecar.
• Configuration of playout of EBU-STL and SRT sidecars can be found in the “Advanced” tab of a channel’s settings.

Just Playout 4.0.0.A1.1021 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.0.GM.104. Please refer to separate release notes.

• Fixed a crash in Just Control after importing a playlist with invalid movie metadata.

Just Playout 4.0.0.A1.1020 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.0.GM.104. Please refer to separate release notes.

• Internal test build.

Just Playout 4.0.0.A1.1019 Release Notes

• This alpha release of Just Play and Just Live 4.0.0 is only intended for testing and should not be used for production purposes.
• This version includes Composition Builder 5.0.0.GM.103. Please refer to separate release notes.

• Fixed a bug that caused interlaced video with certain encoding (e.g. mpeg) to be played back de-interlaced instead of preserving both fields.

Just Playout 4.0.0.A1.1018 Release Notes

• This alpha release of Just Play and Just Live 3.6.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.102. Please refer to separate release notes.

• After configuring a TCP or HTTP event device, the entry in the list of devices is now correctly updated to reflect any changes (e.g. change of host or port).

• The list of event devices in the “Events” tab in the configuration panel now only displays the available devices.

Just Playout 3.6.0.A1.1017 Release Notes

• This beta release of Just Play and Just Live 3.6.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.101. Please refer to separate release notes.

• Added “Apple Event Script” to the event devices in the “Events” tab in the configuration panel. This allows you to create event presets to execute AppleScript code, for example to control another application that supports AppleScript Events.

Just Playout 3.6.0.A1.1016 Release Notes

• This beta release of Just Play and Just Live 3.6.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.100. Please refer to separate release notes.

• Resolved a bug that prevented all TCP events (e.g. Blackmagic Videohub) being executed correctly in the engine although the “Test” button in Just Control worked correctly.
• Updated Blackmagic drivers to 12.2.2, please install this version if you are using Blackmagic hardware.
• Updated AJA drives to 16.2, please install this version if you are using AJA hardware.
• Added additional logs to Just Out’s logs when requested to restart or quit by Just Connect (e.g. stopping the channel).

Just Playout 3.6.0.A1.1015 Release Notes

• This beta release of Just Play and Just Live 3.6.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.99. Please refer to separate release notes.

• Fixed a bug in TCP events (e.g. Blackmagic Videohub) that sometime resulted in the event failing to execute although no error was reported.

• When multiple AJA devices are connected, quitting Just Out now “releases” all of the devices into the “standard” mode, not just the first device.

Just Playout 3.6.0.A1.1014 Release Notes

• This beta release of Just Play and Just Live 3.6.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.98. Please refer to separate release notes.

• Fixed a bug in TCP events (e.g. Blackmagic Videohub) that sometime resulted in the event failing to execute although no error was reported.

• The “System” tab in the configuration panel has been split into two sub-tabs: “Logs & Profiles” for viewing and saving logs and system profiles, and “Configurations” for managing configurations and restarting services. You can use the “Configurations” tab to restart Just Connect remotely or reset it completely (remove all current channels and return it to the “initial” state.

JJust Playout 3.6.0.A1.1013 Release Notes

• This beta release of Just Play and Just Live 3.6.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.96. Please refer to separate release notes.

• Fixed a bug that sometimes resulted in events in the library’s “Event” tab having a colour “tag”.

Just Playout 3.6.0.A1.1012 Release Notes

• This beta release of Just Play and Just Live 3.6.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.96. Please refer to separate release notes.

• Fixed a bug that resulted in event presets with multiple events only executing the first event.
• Event presets are now fully editable by double-clicking a preset in the presets table. This opens the preset editor where you can view or change current events, add additional events, or remove individual events from the preset.

Just Playout 3.6.0.A1.1011 Release Notes

• This beta release of Just Play and Just Live 3.6.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.95. Please refer to separate release notes.

• The “execution context” has been removed from the “Events” tab in the configuration panel.

Just Playout 3.6.0.A1.1010 Release Notes

• This beta release of Just Play and Just Live 3.6.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.94. Please refer to separate release notes.
• There is a new HTTP event preset available for controlling an AJA KiPro device.
• There is a new TCP event preset available for controlling a Blackmagic Hyperdeck device.
• There is a new “Bash Shell Script” event device that can be used to create event presets that will be executed as a script in the Bash shell. In the preset window there are some variables that may be used in the script, for example the path or name of the currently playing video file.

Just Playout 3.5.0.GM.1000 Release Notes

• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.93. Please refer to separate release notes.
• The “Connections” tab in the multi-viewer inspector now shows additional information when two or more instances of Just Control are connected to the same device and/or channel. For up to 9 connections, the number is shown, for 10 or more, “9+” is shown next to the device or channel.
• Fixed some visual user interface issues in Just Control running on macOS 11 Big Sur or later.

Just Playout 3.5.0.GM.999 Release Notes

• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.GM.92. Please refer to separate release notes.
• Fixed the visual styles of various controls in the channel configuration tabs.

Just Playout 3.5.0.B1.998 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.90. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Updated the “white list” of compatible hardware in TOA System Checker.
• Added a check for port 5000 in TOA System Checker running on macOS 12 Monterey as there may be a conflict with the system AirPlay Receiver.

• Fixed occasional crashes in Just Control.
• Stability improvements when using an LTC audio device.

Just Playout 3.5.0.B1.997 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.90. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• The “on-air” and “next” titles in the multi-viewer are now updated when a new movie starts playing when the scheduling tab is not currently open.

• Fixed occasional crashes in Just Control.

Just Playout 3.5.0.B1.996 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.89. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Fixed a bug that could caused unexpected results opening the scheduling tab after changing a channel’s scheduling mode from Just Play to Just Live or vice-versa.
• Resolved an issue that caused unexpected behaviour for certain controls in the inspector on non-retina displays on macOS 11 Big Sur and higher.

Just Playout 3.5.0.B1.995 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.88. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• When first opening Just Play’s schedule tab, the workbench now automatically jumps to the currently playing item.
• After logging into Just Control and any channel viewers are connected, if the mouse is currently inside any of the connected viewers, the viewer now shows any action buttons. Previously it was necessary to first move the mouse pointer outside of the viewer, and then back inside again.

Just Playout 3.5.0.B1.994 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.87. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Removed an additional “Important Information Read Me First” from the DMG, the “Important Notes Read Me First” now has the correct icon.
• Whenever a new video being playing, any audio peaks in the on-air viewer are now automatically cleared.
• Fixed a bug opening Just Live’s scheduling tab when the inspector and library had previously been closed where the “Folder” list was shown larger and larger each time Just Control was started.
• After logging into Just Control and any channel viewers are connected, if the mouse is currently inside any of the connected viewers, the viewer now shows any action buttons. Previously it was necessary to first move the mouse pointer outside of the viewer, and then back inside again.

Just Playout 3.5.0.B1.993 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.86. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• If Just Out has been activated in System Preferences > Tools On Air > Stay Alive, restarting Just Out by deactivating the channel in Just Control not longer results in 2 instances of Just Out running on the system.
• Corrected a reference to the “AirPort Receiver” to “AirPlay Receiver” in the alert shown in Just Connect when the server port cannot be bound to.
• Added the current 2020 M1 Mac Mini (9,1) and the “Apple M1” GPU to TOA System Checker, thus removing errors when running on that system.
• Corrected some links to the user manuals in the DMG.

Just Playout 3.5.0.B1.992 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.86. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• When selecting a layer in Just Play’s timeline (by clicking on the layer’s title area), the inspector is now correctly updated. For example, selected an FX layer with infinite graphics now correctly selects the “Infinite Graphics” tab in the inspector and displays the graphic’s attributes.
• Selecting a playlist in Just Play’s library’s “Playlist” tab no longer enables the “Trim” button beneath the library.
• Fixed a bug that incorrectly showed a “slider” next to the input field for certain FX properties. In this case, the slider had no effect when moving it.
• Added an alert before changing the device’s (ie. Just Connect’s) port in the configuration panel.
• It is now possible to double-click an event preset in the library’s “Event” tab to add the event in both Just Play’s and Just Live’s scheduling tabs.
• It is now only possible to activate a playout device when all of the channels have been stopped. This is due to the fact that activating a device can result in layers being added or removed and other settings being changed depending on the license code, and these changes are only allowed when channels are not running.
• Fixed a bug that resulted in file “tags” being ignored in Just Control on certain file systems, for example certain shared network volumes.
• The size (height) of the “control” area (containing the live viewer and workbench preview) is now saved and restored in Just Live’s scheduling tab between sessions.

Just Playout 3.5.0.B1.991 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.85. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Fixed a bug that resulted in movies copied over a slow connection (e.g. network shared storage) to be marked as unusable until a restart of Just Control.

Just Playout 3.5.0.B1.990 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.84. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Fixed a bug that resulted in certain properties (e.g. video item’s audio level) not being correctly updated when using the slider in the inspector to change the value.
• The channel’s “state” in the scheduling tab (e.g. sizes of the inspector and library, library and inspector open/closed state) is now saved and restored between sessions.
• Fixed an issue that resulted in the “View > Workbench Columns” menu in Just Play and live’s scheduling tab showing the incorrect status for hidden columns after hiding one or more columns, quitting Just Control and then opening the channel again. 

• Updated the Blackmagic Decklink drivers to version 12.2. If you are using Blackmagic products, please update your system to this version.

Just Playout 3.5.0.B1.989 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.83. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Fixed a bug that caused the channel viewer action buttons to disappear on systems that had previous changed the preferences in Just Control.
• Fixed a bug that resulted in the action buttons being permanently displayed in the on air viewer in the scheduling tab, even if the mouse cursor was not over the viewer. 

Just Playout 3.5.0.B1.988 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.83. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Double-clicking on the “Next sync-point” label above the master timecode in Just Play’s scheduling tab now correctly jumps to the sync-point’s time.
• Removed the “Jump To Next” button beneath the master timecode in Just Play’s scheduling tab now that the on-air viewer also has an action button for jumping to the next clip.
• Updated the “Jump To Next” action button in Just Play’s on-air viewer and the group button’s icon in the multi-viewer.
• It is no longer possible to drag and drop elements between the workbench and timeline in Just Play’s scheduling tab. Dragging items within the workbench and/or timeline works as before.
• Inserting or removing a video from the video layer now “inserts” or “deletes” the given time from an audio layer as was previously the case with FX and event layers. This means than an audio item scheduled to be played out during a video will be removed if the video itself is deleted.
• Just Control’s preferences panel has an additional third “Mouse Behaviour” called “Action Button” that can be used to control when the viewer’s action button is shown or hidden. For example, by setting all three options to “Hide”, the multi-viewer can now be configured to never show the action button at all, so all actions can only be triggered by using keyboard shortcuts and/or the group action buttons.

Just Playout 3.5.0.B1.987 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.82. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• When creating a new channel in Just Control, the default buffer size for Just Out is now 2 seconds for all output formats.
• Fixed a bug that caused unexpected behaviour rendering graphics after playing out a graphic that included the “live engine output” as part of the composition.
• When creating event presets to control a Blackmagic ATEM device, the inputs can now be specified by name as well as by index. So, for example, “MP1” can be used to switch to the Media Player 1, “BLK” for black, “COL1” for a colour, or any of the camera labels including any that are user-defined. You can specify both the “short” or “long” names. As event presets are also used for failover control, failover events can now also switch to the “internal” inputs such as the media players.
• The “Closed Captions” license option has been renamed to “VANC Data” to reflect the fact that SCTE events are now supported. A valid VANC license option will enable both closed caption and SCTE VANC output.

Just Playout 3.5.0.B1.986 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.81. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Just Connects’s diagnostics window now shows the communication port used to communicate with Just Control.
• Added an additional alert when adding a new device to the connections configuration panel with “localhost”.
• Updated the licensing “blips” with the macOS 11 Big Sur “look”.
• Updated Just Control’s “splash screen” with the macOS 11 Big Sur “look”.
• When a video in Just Live has been cued or re-cued whilst playing, the live viewer now shows a single “play” button instead of “play” and “cue” as cueing an already cued video does not make sense.
• For an “active” Just Live channel (one with one or more Just Out engines assigned), the scheduling tab is now “disabled” with an overlay showing “Waiting for engines…” if none of the channel’s assigned engines are currently playing. This prevents issuing commands to a channel without any live engines as these commands cannot currently be executed.

Just Playout 3.5.0.B1.985 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.80. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Fixed a bug where resizing Just Live’s tab did not correctly resize the live viewer.
• The preview viewer in Just Live’s tab now displays the name of the preview item above it.
• Fixed an issue running on macOS 11 Big Sur and later on an M1 system where the titles (Library, Inspector, Calendar etc.) were aligned to the right instead of centred.
• Events with dynamic attributes (e.g. SCTE events with changeable attributes in the inspector) are now updated and executed correctly in Just Live after changing one or more of the attributes.
• Reverted the default Just Connect port to 5000 on all systems including macOS 12 Monterey and later, and added extra information about disabling the AirPlay Receiver to the alert shown if the server fails to start.
• When creating a new playout channel in Just Control, the channel includes one event and one audio layer by default to allow easier testing of most features without needing to add new layers later.

Just Playout 3.5.0.B1.984 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.79. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Fixed a bug that that resulted in unexpected behaviour playing graphics in Just Live that have stop-frames.
• In Just Live’s scheduling tab, the live viewer now has overlay buttons that allow you to control the main video layer including playing or cueing the next item, or pausing, re-cueing or ejecting the currently playing item.

Just Playout 3.5.0.B1.983 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.78. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Fixed a bug that prevented dragging and dropping items in the timeline in Just Live’s scheduling tab.
• The channel’s current connected status (Online, Offline, Primary, Redundant, Failover) is now displayed in Just Live’s scheduling tab as was already the case for Just Play.

Just Playout 3.5.0.B1.982 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.77. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• For systems running macOS 12 Monterey or later, the default port used to communicate between Just Control and Just Connect is now 5001 instead of 5000 to prevent conflicts with the system AirPlay service.
• Clicking on an already selected folder in Just Live’s schedule tab now shows the folder’s properties in the inspector.
• For playlist folders in Just Live’s schedule tab, clicking the playlist button to the right of the folder’s name now loads the folder’s contents into the timeline.
• The buttons in Just Live’s workbench are now coloured red, yellow and green as was previously the case in version 2 of Just Live.

Just Playout 3.5.0.B1.981 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.76. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Fixed a crash in Just Control after connecting to a playout channel.
• Fixed corrupted output playing out certain movies (e.g. SD resolution) on Apple Silicon Macs.

Just Playout 3.5.0.B1.980 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.75. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• When activating a channel with a license that contains more layers than the current channel configuration, added layers are now assigned to the default engines.
• When activating a channel with a license that contains fewer layers than the current channel configuration, layers are now correctly removed from the channel.
• Updated the Template Package for compatibility with version 5 of Composition Builder.

Just Playout 3.5.0.B1.979 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.74. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Updated the Blackmagic ATEM drivers to version 8.6.4 to add support for ATEM events running on an Apple Silicon (e.g. M1) Mac.

Just Playout 3.5.0.B1.978 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.73. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• The “Just Playout” folder icon has been updated to match the macOS 11 Big Sur design.
• Just Out now supports reference LTC timecode for syncing the master time, either via an audio input or by connecting directly to the AJA’s LTC input port (not available on all cards). These additional sources can be selected in Just Out’s preferences panel.

Just Playout 3.5.0.B1.977 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.72. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Updated all application icons to match the macOS 11 Big Sur design.

Just Playout 3.5.0.B1.976 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.71. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Fixed a bug upgrading channels from previous versions that used AJA with DSK live input that resulted in an invalid channel configuration and unexpected behaviour and crashes.

Just Playout 3.5.0.B1.975 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.70. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Stability improvements running natively on an Apple Silicon Mac.
• Fixed alignment issues for inspector group buttons (e.g. “Clear Error” in the errors & warnings group).

Just Playout 3.5.0.B1.974 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.69. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• This version is a “universal” binary that runs natively on Apple Silicon (e.g. M1) Macs as well as those with Intel CPUs.

Just Playout 3.5.0.B1.972 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.67. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Updates to Composition Builder.

Just Playout 3.5.0.B1.971 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.66. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Updates to Composition Builder.

Just Playout 3.5.0.B1.970 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.65. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Video files in the library now have a 1% “error of margin” for the frame-rate, so a file reported as between 24.75 and 25.25fps will be shown in the library as 25fps and can be scheduled on a 25fps channel. Some files encoded on certain systems or with certain codecs may report a slightly “wrong” frame-rate but within this 1% margin.

Just Playout 3.5.0.B1.969 Release Notes

• This beta release of Just Play and Just Live 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.64. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• The separate Just Play and Just Live release notes have been merged into this single Just Playout release notes.
• When using AJA devices without a live input, if a reference signal is attached to the card then the output will lock to the reference signal.
• HTTP events have been expanded to include both GET and POST methods in order to support more web services. In addition, a new “SendGrid” preset has been added to support events that send email.

Just Play 3.5.0.B1.968 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.63. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• When scheduling a SCTE-104 event, the parameters are now fully “dynamic”, meaning that they are shown in inspector when selecting the event in the timeline and they can be changed at any time before the event is played out.

Just Play 3.5.0.B1.967 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.61. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• The “Show scroll bars” system preferences setting is now always respected by Just Control.
• Removed unsupported “File > Import FCPX XML Playlist” menu action.

Just Play 3.5.0.B1.966 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.61. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.

Just Play 3.5.0.B1.965 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.60. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.

Just Play 3.5.0.B1.964 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.59. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.

Just Play 3.5.0.B1.963 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.58. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.

Just Play 3.5.0.B1.962 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.55. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Fixed a bug where selecting the “No in, video+key out” mode incorrectly offered 8-bit and 10-bit formats instead of RGBA, which in turn resulted in unexpected output from Just Out. Now, after selecting the correct RGBA mode, the SDI key output will be as expected.

Just Play 3.5.0.B1.961 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.55. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Updated AJA drivers to 16.1, please install this release when using AJA hardware.
• Added “SCTE-104” to the list of devices in the “Events” tab in the channel configuration and “SDI VANC” to the transport to allow for inserting SCTE-104 events in the output SDI signal’s VANC data. Once defined, you can define SCTE-104 “insert splice data” presets in the “Presets” tab. These presets can then be played out by scheduling them on an events layer.

Just Play 3.5.0.B1.960 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.55. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Fixed small issues in the EULA.
• Updated all Composition Builder templates in the Template Package to version 5.0, thus fixing some issues with templates showing the component “enable” state as a number instead of a checkbox.
• Updated the folder icons in the Template Package to the new ToolsOnAir CI.

Just Play 3.5.0.B1.959 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.54. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.

Just Play 3.5.0.B1.958 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.53. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.
• Updated the ToolsOnAir EULA.

Just Play 3.5.0.B1.957 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.52. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder! Please refer to separate release notes.

Just Play 3.5.0.B1.956 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.51. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder!

Just Play 3.5.0.B1.955 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• This version includes Composition Builder 5.0.0.B1.50. This release is intended for testing purposes only, not production use. Please backup any compositions before using this version! Note that compositions saved by this version cannot be opened in earlier releases of Composition Builder!

Just Play 3.5.0.B1.954 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Failover states are now only executed when the given engine (primary or redundant) is “stable” (meaning e.g. that the SDI signal should be valid), so the delays are now set to zero by default. In most cases, a delay of 0 for all cases should give the best results.
• Removed the “delay” fields from the failover configuration as a value of zero gives the best results in all cases.

Just Play 3.5.0.B1.953 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Failover states are now only executed when the given engine (primary or redundant) is “stable” (meaning e.g. that the SDI signal should be valid), so the delays are now set to zero by default. In most cases, a delay of 0 for all cases should give the best results.

Just Play 3.5.0.B1.952 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Failover states are now only executed when the given engine (primary or redundant) is “stable” (meaning e.g. that the SDI signal should be valid), so the delays are now set to zero by default. In most cases, a delay of 0 for all cases should give the best results.
• When disabling failover control, a warning is first shown that the configuration will be lost and must be re-configured after disabling with the option to cancel.
• Fixed a bug that caused the connection between Just Out and Just Connect to be lost when clicking on a menu in Just Out and/or opening one of the panels (“About”, “Preferences”), which in turn caused Just Connect to show the engine as “lost”.

Just Play 3.5.0.B1.951 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• The channel configuration panel now has an additional “Failover” tab allowing you to define the event presets that should be executed when the channel is in one of the three states: “Primary”, “Redundant” and “Failover”. The events and presets should first be defined in the “Events” tab. In each case, you specify a delay and one or more event presets when the channel has been running in the given state for the specified number of seconds. For example, if the “Primary” state defines a delay of 2 seconds, once the channel’s primary engine has been running without interruption for 2 seconds, the event presets will be executed. For each state, you might define for example the event preset that will switch a video router (Kumo, VideoHub, ATEM) to the correct SDI input for the relevant “state”. Equally, it is possible to define GPI triggers or any other kind of supported event.
• When creating a new channel, the primary engine is now called “Primary” and not “Master”. 

Just Play 3.5.0.B1.950 Release Notes

• This beta release of Just Play 3.5.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Event presets are now defined in the channel’s configuration panel instead of the scheduling tab. The channel configuration “Events” tab now has two sub-tabs, one for defining devices and one for defining presets. As the presets are now stored in the channel’s configuration, they are now available automatically on any system logging into the channel via Just Control. Further, when managing multiple channels in Just Control, only the channel’s specific event presets are shown in the library, not the presets for all channels.
• Fixed user interface issues in Just Control’s preferences panel when running on macOS 11.0.

Just Play 3.1.0.GM.941 Release Notes

• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• TOA System Checker now reports the correct version of macOS when running on 11.0.

Just Play 3.1.0.GM.940 Release Notes

• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Added Just Control to the list of applications in “Stay Alive” in the Tools On Air System Preferences pane.
• Correctly show an alert on macOS 11.0 when Apple’s Professional Video Workflow Plug-ins aren’t installed on the system.
• When changing the start time of the As Run Log in the channel’s configuration, the label showing the start time is now correctly updated.

Just Play 3.0.1.B1.939 Release Notes

• This beta release of Just Play 3.0.1 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• HTTP(S) and TCP events now support a third “metadata” parameter type to allow events that respond to schedule metadata such as a movie playing or a movie finished. These events are executed by Just Connect instead of Just Out, and therefore there may be a small delay between the movie playing or finishing and the event being fired.
• HTTP(S) and TCP string and metadata parameters now have the “Transform” field enabled. For integer parameters, the transform field is an integer offset. For string and metadata fields, the transform field is a regular expression that can be used to ensure that the incoming metadata fields conform to a given format. In the case that the incoming metadata values fail to be parsed by the regular expression, then the event will not fire.
• Fixed a bug when testing TCP events in Just Control that showed a green “OK” status when the “host” field was empty or had an invalid format.
• TCP events now respect the event’s timeout setting when trying to connect to an unreachable host.
• The TCP event configuration panel now also has a “response” field as with HTTP(S) events, and the response is set after testing to reflect the outcome of the test.
• The “Events” channel configuration tab now has two addition buttons for saving the currently selected event as a preset and for loading a previously saved preset.
• The “Add Event Preset” panel in Just Play’s “Event” tab now shows a warning that there are no event devices defined if there are devices defined but they are inactive. Previously the warning was only shown if there simply weren’t any event devices defined.

Just Play 3.0.1.B1.938 Release Notes

• This beta release of Just Play 3.0.1 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Added 2 new types of event: HTTP(S) and TCP. The HTTP(S) event type can be used to construct a URL that is sent to a server that supports a HTTP (REST) API, for example the AJA Kumo video switcher. The TCP event type is similar, but supports devices offering a “plain text” TCP API, for example Blackmagic VideoHub, Ross devices that support RossTalk, Evertz devices that support Evertz Quartz and Sierra devices that support Sierra Aspen. Both event types support parameters changeable by the user that can be used to create a preset, for example setting a specific input on a specific output on a video router. Legacy event devices specific to a certain device (e.g. Blackmagic Videohub) have been disabled and will be automatically migrated to use the new events.
• Fixed a crash in Just Connect that could occur shortly after midnight.
• Channels now support up to 7 video layers instead of the previous 3.

Just Play 3.0.1.B1.937 Release Notes

• This beta release of Just Play 3.0.1 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a bug that resulted in Just Out logs missing from the list of logs in the configuration panel, and incorrect logs in the TOA System Profile.

Just Play 3.0.1.B1.936 Release Notes

• This beta release of Just Play 3.0.1 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Increased the timeout when gathering logs and system profiles to prevent large Just Out logs being excluded.

Just Play 3.0.1.B1.935 Release Notes

• This beta release of Just Play 3.0.1 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a bug that could cause the connection between Just Connect and Just Out to be lost temporarily while gathering log files (e.g. TOA System Profile), and as a result the log file to be placed in the wrong folder in the resulting profile.
• Graphics files named “Composition.qtz” are now correctly checked for “illegal” patches.
• Updated the copyright in the individual Apps to 2021.
• Update Blackmagic Decklink drivers to 12.1, please use this version when using Blackmagic hardware.

Just Play 3.0.1.B1.934 Release Notes

• This beta release of Just Play 3.0.1 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Archived log files for all applications are now correctly shown in Just Control and included in the System Profile.

Just Play 3.0.1.B1.933 Release Notes

• This beta release of Just Play 3.0.1 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Updated AJA drivers to 16.0.2, please use this version when using AJA hardware.

Just Play 3.0.1.B1.932 Release Notes

• This beta release of Just Play 3.0.1 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• The “Audio Monitor” menu item has been moved from the audio bars context menu to the “View” menu and now has the shortcut cmd-alt-A to toggle the audio monitor for the channel. In addition there is a new menu item to clear any audio “peaks” for the channel.

• Fixed a bug where opening the Configuration Panel (or pressing cmd-alt-,) during initial device setup resulted in a second configuration “wizard” being shown.
• Logs are now archived every 24 hours to the folder ~/Library/Logs/ToolsOnAir, and these logs are included in the system profile. This means that logs are now available going back further than the current 3 days.
• Fixed a bug with the Tools On Air “watermark” for demo channels using a DSK live or video+key mode.

Just Play 3.0.1.B1.931 Release Notes

• This beta release of Just Play 3.0.1 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a bug causing corrupt output with 10-bit output.
• Improved logging when using the watch folder in Just Connect.
• Fixed an issue controlling “infinite” graphics via properties in the inspector.

Just Play 3.0.1.B1.930 Release Notes

• This beta release of Just Play 3.0.1 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Replaced the watermark “overlay” for non-licensed (demo) channels with a “blip” for 1 second out of every 10 with 2021 Tools On Air logos.
• When creating a new channel via the “setup wizard” in Just Control, a prompt is shown if no name is entered for the channel. Previously this resulted in a crash in Just Connect.
• Fixed a bug that resulted in a playlist dropped into the watch folder for a day in the future that did not yet have any schedules defined having a start time of midnight instead of the time specified in the playlist.
• Fixed a crash in Just Connect related to the watch folder.
• Fixed an issue in Just Connect where activating the watch folder resulted in a high level of CPU usage.

Just Play 3.0.1.B1.929 Release Notes

• This beta release of Just Play 3.0.1 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Updates to core components related to ingest.

Just Play 3.0.0.GM.928 Release Notes

• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a bug that caused Just Connect to show “Waiting for engines” after losing the connection to Just Out and reconnecting.
• The list of log files in Just Control’s device configuration panel now updates automatically when Just Out is started or stopped.

Just Play 3.0.0.B1.927 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• When creating a system profile, the profile now also includes logs, crash reports and other details related to Just Control.

Just Play 3.0.0.B1.926 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a bug that prevented the “Show Logs” button in Just Out’s diagnostics window correctly showing the logs in the Terminal window after opening.

• Removed thousands of error logs in Just Out when playing out movie files that contain no audio.

Just Play 3.0.0.B1.925 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Added a menu item to the scheduling tab’s “View” menu to clear any errors and warnings for the channel.

• Updated to Blackmagic Decklink 12.0 drivers, please update if you are using Blackmagic devices.

Just Play 3.0.0.B1.924 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a bug that caused a “black line” at the top of the output in non-SD formats on channels without a “closed captions” license.
• For new channels, the “As Run Log” settings now match previous versions.
• Added column headers to the tables in the “As Run Log” and “Repository” tabs in the channel configuration.

Just Play 3.0.0.B1.923 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Removed GPI control preferences from the playout preferences in Just Control as these are currently not available.
• The “Machine ID” is now correctly displayed in configuration panel’s “Activation” tab after starting Just Connect for the first time and configuring the first channel.

Just Play 3.0.0.B1.922 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Added a warning alert to Just Out and Just Control if the system doesn’t have the “Pro Video Formats” bundle from Apple installed.
• The “Just Control Help” menu item in Just Control’s “Help” menu now opens the landing page for all Tools On Air product user manuals.
• Removed the “CC” (closed captions) icon next to the “on-air” preview in Just Play’s scheduling tab as it is not currently active. In a future version this will indicate when the currently playing item has closed captions.

Just Play 3.0.0.B1.921 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Updated links in the DMG for the 3.0 documents and added additional links for the new “Read Me First” document and Apple’s Pro Video Format bundle.

Just Play 3.0.0.B1.920 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Updated to AJA drivers version 16.0.1. Please install the latest drivers from AJA when using this build.
• Fixed a “stall” (spinning wheel) in Just Control after jumping to a different day using the date picker.
• Resolved issues as a result of Just Out stalling and dropping frames (e.g. with slow storage).

Just Play 3.0.0.B1.919 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Updated the Service USB GPI device drivers to work with macOS 10.15. and 11.0.
• Fixed a bug that could cause Just Control to “lock up” (spinning wheel) when dragging the timeline or calendar view, or after dropping a playlist.

Just Play 3.0.0.B1.918 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed “stalls” or “freezes” (spinning wheel) in Just Out and Just Control after changing the system clock.
• When dropping a folder that contains sub-folders with “invalid” movies (e.g. wrong frame-rate) on the timeline, dismissing the alert with “Do not show again” now correctly does not show the alert again.

Just Play 3.0.0.B1.917 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a crash related to playlists with a duration of exactly 24 hours.
• The default Just Out buffer is now set to 6 seconds for SD channels, 4 seconds for HD channels and 2 seconds for UHD channels.
• Resolved a crash related to the Tools On Air Subtitling plug-in.
• When a text field for a graphic item that is current on air is selected (has the keyboard focus), clicking “away” from the text field (either another field in inspector, or anywhere else in the window) was sending an update to Just Out that caused the buffer to be flushed, even if the value in the text field had’t changed. Now an update is only sent when the value in the text field has actually changed.

Just Play 3.0.0.B1.916 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• The distribution DMG and all Apps contained within it are now “notarised” by Apple, meaning all versions of macOS will open them without Gatekeeper issues.
• It is no longer possible to close the “multi-viewer” tab when in tabbed mode (e.g. with at least one scheduling tab open).
• There is a new menu item in Just Out’s “Window” menu to open the Diagnostics window after closing it.
• It is no longer possible to change a movie’s out-point once it is playing out.
• It is no longer possible to open the movie trimmer for a movie being played out using the menu shortcut.
• Removed the “Add NDI Channel” and “Add SRT Channel” menu items in the device configuration panel for new, disconnected devices.

Just Play 3.0.0.B1.915 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• New channel now have “Restart on drift” enabled by default with a value of 5 seconds.
• Fixed an issue where channels with “Join in progress” scheduling were using “Reschedule all” instead.
• Fixed a bug that resulted in unexpected behaviour when the channel’s scheduling tab was open and active in Just Control and Just Connect quit.
• The output format names have changed to match those used in Tools On Air’s ingest products. In addition, it is now possible to select either 8-bit or 10-bit SDI output.

Just Play 3.0.0.B1.914 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• When changing a channel’s frame-rate, the default gap playlist and movie settings are now cleared and must be re-assigned with a valid movie or playlist. The warning in Just Connect has been updated to reflect this change.
• Fixed unexpected behaviour in the timeline’s “ruler”.
• The default timecode in the scheduling tab’s preview is now “Primary Medium”.
• Fixed a bug that meant both the default gap playlist and movie settings were ignored.

Just Play 3.0.0.B1.913 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Changes related to Just Live.

Just Play 3.0.0.B1.912 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Removed the additional “ghost” dragging images when dragging audio or graphic items in the timeline.
• Removed references to just:cc and recap from Just Control.
• The “Show Video Trimmer” menu item in the scheduling tab’s “View” menu is now correctly updated to reflect whether or not the trimmer is active.
• The timecodes shown in the video trimmer are now correctly vertically aligned.
• Added a fourth timecode to the video trimmer’s top toolbar. Previously there were three timecodes: in-point, duration/current and out-point, where the middle timecode showed duration except when dragging the CTI in which case it showed the current timecode. Now, the current time and duration are always displayed at all times, and the current time is also updated when playing the movie.

Just Play 3.0.0.B1.911 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a bug that required a restart of Just Connect and Just Out after adding a new layer to a channel and assigning it to an engine.
• A warning regarding missing repository folders is now shown every time the scheduling tab is opened in Just Control, and the three alert windows (one for video/graphic/audio folders, one for event presets and one for playlists) have been merged into a single alert.
• When disconnecting or stopping a channel, any error status (e.g. "INVALID LOGIN" or "UNKNOWN UI”) is now correctly cleared. This means that any changes made to the channel (e.g. changes to users, registered user interfaces) are now reflected once the channel is started again without requiring a restart of Just Control.
• Fixed a bug that allowed a graphic item’s duration to be extended beyond the start of the next scheduled item, which in turn meant that the next scheduled item wouldn’t be played out.
• Removed the requirement to have the correct “bundles” for Blackmagic routers (ATEM and Videohub) installed at /Library/Application Support/Blackmagic Design”.
• Resolved an issue that caused all ATEM events to fail once the connection to the ATEM device was lost (e.g. network issues). Now the connection will be re-established when the next event is fired.
• Fixed a bug that sometimes caused cached poster frames (usually stored in the user’s “Documents/Poster Frames” folder) to be left in the folder even after the related items were deleted from the schedule.

Just Play 3.0.0.B1.910 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Removed the “streaming output” status in the channel’s activation tab as this option is not currently supported.
• When dropping items in the workbench or timeline, the item’s colour is now correctly set if the dropped file has a Finder tag set. As a consequence, if the channel has infinite graphics on a layer and that layer has a colour set matching the Finder tag’s colour, the infinite graphic is now automatically hidden for the duration of the dropped item.

Just Play 3.0.0.B1.909 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Stability improvements when previewing graphics in Just Control.
• When updating a channel from 2.7 or earlier, the channel’s IP is now the local machine’s IPv4 address instead of “localhost”.
• When updating a channel from 2.7 or earlier, Just Out engines are now correctly assigned to the same layers.
• When updating a channel from 2.7 or earlier, any “hide infinite graphics” colour is now correctly assigned to the layer.

Just Play 3.0.0.B1.908 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Removed the streaming options tab from the engine configuration panel in the channel’s “Engines and Layers” configuration tab.
• Removed the decoding options in the channel’s “Advanced” configuration tab.
• When Just Out fails to start due to a configuration error (e.g. output device not found), the error is now shown in Just Control as well as Just Connect.

Just Play 3.0.0.B1.907 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a memory issue causing Just Control to become temporarily unresponsive after copying and pasting or adding items to a playlist with auto-duration enabled.
• Fixed a bug that resulted in playlist updates not being sent to Just Out and therefore Just Out to “run out” of playlist after a few hours and go black.

Just Play 3.0.0.B1.906 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a memory leak related to poster frames, in particular for growing files.

Just Play 3.0.0.B1.905 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• As with previous versions, the library and inspector previews are now disabled for growing movie files.

Just Play 3.0.0.B1.904 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a memory leak when using Blackmagic devices.
• It is no longer possible to enter an empty name for a device or channel in the configuration panel.
• Once a channel has a “final” license (without an expiry date), it is no longer possible to add or remove layers to or from the channel.
• When adding, removing or moving layers within a channel, the changes are saved immediately to prevent loss if Just Control is quit before activating the channel.
• When licensing a channel, the layers in the channel are now correctly adjusted (adding or removing layers according to the number of layers specified in the license).

Just Play 3.0.0.B1.903 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Resolved an issue that prevented graphics (QTZ or Composition Builder templates) being previewed in Just Control or played in Just Out.
• Changed references in Just Control from “Master” (e.g. engine) to “Primary”.
• When changing a channel’s redundancy mode in the “Advanced” tab in the channel’s configuration panel, the options in the “Layers and Engines” tab are now automatically updated to reflect the changes.
• Fixed a bug where tabs in the library were not updated when the first file was added to the repository folder shown by the tab. For example, adding the first event to the “Event” tab or the first playlist to the “Playlist” tab.
• Removed the ability to drop movies into an FX track in Just Play or drop a movie to the workbench in Just Live with the command key held down to convert it to a “graphics movie” clip as they are no longer supported by Just Out.
• Disabled further properties for various types of scheduled events (movies, graphics, live inputs, gaps) in the inspector when the item is either on-air or played out.
• Fixed a crash related to buffered input using Blackmagic devices.

Just Play 3.0.0.B1.902 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• This version requires a new 3.0 license code, invalidating any older 2.0/2.5 license codes. If you already have a valid license code for 2.0/2.5, please contact ToolsOnAir for a new code before installing this build.
• Fixed a bug that prevented closed captions being passed to the output device in either “demo” mode or with a valid licence including the closed caption option.
• Resolved an issue that prevented just:in events being executed correctly.
• The “timeout” field in the channel’s “Events” tab in the configuration panel is now disabled for devices that don’t support a timeout.
• The “ethernet IP port” field in the channel’s “Events” tab in the configuration panel is now correctly set to the default port for the given device type and disabled for devices that have a fixed port.

Just Play 3.0.0.B1.901 Release Notes

• This beta release of Just Play 3.0 is only intended for testing and should not be used for production purposes.
• Resolved an issue that prevented Service USB GPI events being loaded and executed.
• Blackmagic ATEM events can now address multiple M/Es, not just the first. If you have a 2M/E or 4M/E ATEM device you can now create events to switch any of the M/Es.
• Blackmagic ATEM events now support “auto-transition” as well as “cut” to the given input. If you select “auto-transition”, then the event will select the given input as the preview and then start the M/E’s auto transition.
• It is no longer possible to assign a “redundant” engine to a channel that is already assigned as a “master” engine.

Just Play 3.0.0.A1.900 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed a crash in Just Connect connecting to Just Out for channels that have no event devices defined.

Just Play 3.0.0.A1.899 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Event presets can now execute multiple events (e.g. multiple switches on a VideoHub, ATEM or KUMO switcher). Note that presets generated by the previous build must be deleted and created again in Just Control.
• There is an additional “timeout/delay” field in the “Events” tab in a playout channel’s configuration pane. This field defines the timeout (in seconds) when connecting to a device (e.g. VideoHub, ATEM or KUMO), or the delay between GPI pulses.

Just Play 3.0.0.A1.898 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Events are now active for the following devices: just:in mac, just:in linux, Blackmagic ATEM, Blackmagic VideoHub, AJA KUMO and Service USB Plus GPI. Event devices can be added to a channel via the configuration panel by selecting a channel and then the “Events” tab. Event presets can be added to a channel by opening its scheduling tab, selecting the “Events” tab in the library and then the “+” button beneath the library.
• Fixed a bug where on certain AJA cards closed captions were missing when using buffered live input and a video+key output mode.
• Fixed a bug where playing a SD movie with CEA608 captions on a HD channel resulted in closed captions not being played out on Blackmagic devices.

Just Play 3.0.0.A1.897 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• When playing out SD movies with CEA608 closed captions on an HD channel, the captions are correctly converted to CEA708.
• System profiles generated in Just Control now include logs from all connected and playing Just Out engines.

Just Play 3.0.0.A1.896 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Master and reference timecode sync now works again as with previous versions. Furthermore, when using drop-frame frame-rates, sync is checked every minute instead of 10 minutes when nothing is currently playing.
• Removed the “System Profile” tab from Tools On Air’s System Preferences panel as profiles are now generated in Just Control.

Just Play 3.0.0.A1.895 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed a bug that often resulted in graphic triggers (starting a graphic, stopping a graphic, triggering a stop-frame) being ignored or “lost” by Just Out.
• The “live volume” property of an audio item is now only applied to the “live input” and not a movie item. Previously, setting a “live volume” of 0 for an audio item would mute the audio of a video item played at the same time as the audio item.

Just Play 3.0.0.A1.894 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed a bug when using the “Buffered in, video out (default pass-thru)” mode that resulted in the live input being routed to the output when a “Gap” element was scheduled.
• Resolved a crash during “buffered” live input if the signal was lost or invalid.

Just Play 3.0.0.A1.893 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed an issue starting Just Out on AJA devices with buffered live input and a different broadcast format selected in AJA Control Panel.

Just Play 3.0.0.A1.892 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Just Connect now attempts to repair damaged channel files, and logs additional errors if the schedule files cannot be saved.
• When using a video+key mode with a Blackmagic device, the key is now correctly routed to the second or “B” output port.

Just Play 3.0.0.A1.891 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed incorrect colour rendering video on systems with AMD graphics.
• Corrected video/audio sync when using Blackmagic devices.
• The “key” output is now correct when using video+key output with an AJA device and DSK live input.

Just Play 3.0.0.A1.890 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Stability improvements when playing out graphics.

Just Play 3.0.0.A1.889 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed crashes playing out movies, in particular non-MXF movies.

Just Play 3.0.0.A1.888 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Stability improvements related to AJA devices.
• Closed captions embedded in an MXF container can now be extracted and embedded in the SDI output signal.

Just Play 3.0.0.A1.887 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• UHD modes are now correctly configured for all AJA devices, selecting either 6G or 12G output on SDI #3 for those cards that support it, or Quad output on SDI #1-4 for cards that do not.
• The “render guard” feature is now once more active.
• When using a video+key mode, the video and key output ports are now fixed to video on odd ports (#1, #3 etc) and key on even ports (#2, #4 etc) independent of whether or not live input is also in use.

Just Play 3.0.0.A1.886 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Stability improvements related to closed captions, particularly with Blackmagic devices.
• Closed captions are now supported end-to-end for both AJA and Blackmagic devices, including caption pass-through when using buffered live input.

• Fixed drift and A/V sync issue with AJA devices under heavy CPU load.

Just Play 3.0.0.A1.885 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Resolved memory leaks, in particular when using Blackmagic devices.
• Fixed a crash in Just Control when stopping and starting channels.
• Still images in an FX track are now rendered correctly.
• Added an alert when Just Connect is started and the communications port is already in use by another application.
• After deactivating the audio monitor in the scheduling tab and then activating again, the previously selected channels are now restored instead of always activating all available audio channels.
• 
  

Just Play 3.0.0.A1.884 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Stability and performance improvements for all devices, particularly related to spurious dropped frames during normal operation, for example when switching between applications. All devices now also recover correctly after true dropped frames, maintaining video/audio sync.
• The Tools On Air System Preferences Panel now properly respects the system’s appearance (e.g. dark).
• Just Out’s Diagnostics window now shows the status of the “decode” and “render” pipeline stages in addition to the “output” stage. This shows in more detail where pipeline stalls may be occurring (e.g. slow decoding, slow rendering).
• The status of the audio monitor is now correctly saved and restored after quitting and starting Just Out, Just Connect and Just Control. For example, if the audio monitor is enabled for a channel and Just Out is re-started, the audio monitor will automatically start once the channel is running.
• Removed “HD 720p24” from the list of output formats.
• Fixed a bug where the “full duplex” class of Blackmagic devices (e.g. Ultra Studio 4K) were incorrectly reporting a single switchable port, thus excluding the “Buffered Live Input” modes,
• For Blackmagic devices that support fill+key output, keying is now automatically enabled by Just Out instead of having to start the “Live key” application.

Just Play 3.0.0.A1.883 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Updated more application icons and logos with the new 2020 Tools On Air look.
• When exporting a day’s playlist, the save file panel automatically defaults to the first playlist repository folder and the default filename is “Playlist” plus the date selected for export.
• It is now possible to drag and drop a day’s playlist from the library to the calendar view.
• Fixed a bug that resulted in dropped items sometimes missing the “colour” attribute depending on where in the interface they were dropped (also after double-clicking an item in the library).
• After changing an engine’s output device, the available “live input / keying” modes are automatically updated to reflect those available for the selected device.
• The “audio” pop-up menu next to the live preview now has an additional “Audio Monitor” menu item to turn audio monitoring on and off for the channel. Previously this was only possible in the multi viewer via the inspector.

Just Play 3.0.0.A1.882 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed an issue that could cause growing files to be displayed incorrectly in the library, stuck on “invalid” without updates and unable to be dragged out of the library.

Just Play 3.0.0.A1.881 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• The “key” SDI output is now correct for AJA devices using the “No in, video+key out” mode.

Just Play 3.0.0.A1.880 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• This build now supports Blackmagic and Virtual devices.
• Poster frames for Composition Builder Documents are now correctly shown in Finder, the library, workbench, inspector and timeline.
• Renamed the output mode “No in, video+key out (default pass-thru)” to “No in, video+key out” and removed “No in, video+key out (default black)” from the list.

Just Play 3.0.0.A1.879 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Clicking the “Reset” button on Just Out’s diagnostics window no longer results in a crash if the engine isn’t currently running.
• Audio monitoring for playout channels on Just Control’s multi viewer is now active.
• Most menu items including preferences and channel configuration are now disabled in Just Control when logged out, and after logging a user out any open windows are automatically closed.
• Fixed a bug that resulted in the video trimming window being displayed incorrectly for some window aspect ratios.
• It is now possible to add new interfaces on the “User Interfaces” tab when configuring playout channels.

Just Play 3.0.0.A1.878 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Added correct icon for the “Events” tab in the library.
• Updated App icons with the new 2020 Tools On Air look.
• Just Connect and Just Out now install the shared Tools On Air System Preferences pane.
• Fixed a bug where updating a previously installed Tools On Air System Preferences pane resulted in the pane disappearing.
• Added the 3.0 versions of Just Out and Just Connect to the “Stay Alive” tab in the Tools On Air System Preferences pane.
• Added a warning in Just Control when using “localhost” instead of the local machine’s current IPv4 address.
• When starting Just Connect for the first time on a “clean” system it now correctly created the required folder in “/Library/Application Support/Tools On Air”.

Just Play 3.0.0.A1.877 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Resolved a bug after adding a new device in the configuration panel that caused the multi viewer to switch to “Connecting…” forever, requiring a restart of Just Control.
• Fixed a bug that caused the configuration panel to “disappear” behind Just Control’s main window after stopping a playout channel that had its scheduling tab open.
• Resolved various issues related to previewing and trimming files in the library.
• Added document type for Composition Builder files so that they appear correctly in Finder, and the correct poster frame is displayed in the library.
• Added document type for .toachannel channel files so that they appear correctly in Finder.

Just Play 3.0.0.A1.876 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Dragging and dropping channels (single or multiple) from the “Connections” tab in the inspector to the multi-viewer now excludes any currently connected channels from the “target” viewers. Only disconnected (empty) viewers can now be dropped onto to connect channels.
• When double-clicking a channel in the “Connections” tab in the inspector it is now automatically connected if the multi-viewer only has a single disconnected (empty) viewer, even if the viewer is not currently selected.
• All 9 output modes including the video+key modes are now active for AJA devices.

Just Play 3.0.0.A1.875 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Resolved multiple issues related to AJA devices.

Just Play 3.0.0.A1.874 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Resolved an issue with HDMI audio output on AJA devices with an audio mixer (e.g. Kona4 or Io4K with the “4K” firmware).
• Resolved an issue with audio output generally on AJA devices with an audio mixer (e.g. Kona4 or Io4K with the “4K” firmware) when “Host Audio” was disabled in the AJA Control Panel.

Just Play 3.0.0.A1.873 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Resolved an issue with SDI output on AJA devices for all modes other than DSK live input.

Just Play 3.0.0.A1.872 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Resolved an issue initialising AJA output devices.

Just Play 3.0.0.A1.871 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed various audio issue related to both AJA and BMD devices.

Just Play 3.0.0.A1.870 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed issues related to output (both HDMI and SDI) using AJA devices.
• When creating a new audio event, the default value for the “live input audio” is now 0 (muted) instead of 1.

Just Play 3.0.0.A1.869 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed a bug where audio was passed through from the SDI input to the output after starting Just Out when an AJA device is set to “Capture / Pass-through” in the AJA Control Panel.
• Fixed a bug where no output was available after starting Just Out when an AJA device is set to “Capture / Pass-through” in the AJA Control Panel and the channel was configured without any live input.
• When dragging and dropping file from Finder to either the timeline or workbench, the same file extension filter used in the library is now applied to prevent files that aren’t shown in the library being dropped from Finder.

Just Play 3.0.0.A1.868 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Resolved a crash starting a channel using a Blackmagic output device.

Just Play 3.0.0.A1.867 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed an issue that could lead to missing audio on AJA devices after a system restart.
• Fixed a crash in Just Control after dropping certain movies to the timeline.

Just Play 3.0.0.A1.866 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Stability improvements related to decoding movies, particularly related to audio.

Just Play 3.0.0.A1.865 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed a hang in Just Out (requiring a “Force Quit”) after stopping the channel in Just Control in order to make changes to the channel’s configuration.
• Resolved an issue that resulted in the schedule for a channel not being deleted after changing the channel’s frame-rate.
• Tested “buffered live input” with Blackmagic input devices.
• Removed some legacy file extensions from the library to exclude file types no longer supported by Just Out.

Just Play 3.0.0.A1.864 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Correctly disconnect the network connection when disconnecting a playout viewer in the multi-viewer.
• Fixed stability issues when playing out with AJA or Blackmagic devices. AJA devices now support playout with no input, with DSK live input and with buffered live input. Blackmagic devices currently only support playout without live input.
• Playout channels now include embedded timecode.
• When adding a new device to Just Control, the IP address and port are used as the default name until the device is connected for the first time. This avoids devices that never connect (e.g. with an incorrect IP or port) having empty names,
• Updates to Just Control’s preferences panel.
• A sensible name is now always shown for all viewers in the multi-viewer. This fixes an issue clicking on the title-bar in a disconnected viewer where some modes would show an empty title meaning it wasn’t possible to click to cycle to the next mode.
• When adding or removing channels from the configuration panel in Just Connect, the device is now automatically expanded to show its channels so that newly added channels are automatically visible.
• Added 4 new options to a playout channel’s “format” and “live input” options related to video+fill output without a live input. These are useful when sending graphics to an external mixer.
• Fixed a bug that prevented audio items on an audio track playing out while a video was playing on the primary video track.
• When starting Just Out it is now necessary to allow Just Out access to the system’s microphone. This is to enable audio pass-through from the SDI live input to the SDI output.
• When upgrading a channel from an earlier version of Just Play or Just Live, any events defined for the channel are now upgraded to work with this version. However, not all types of event are currently supported by Just Out. Any events not currently supported are included in the channel’s settings, but are disabled and cannot be enabled. Should these types of events be added to a future build, you can then simply enable them again for the channel.
• It is now possible to defined event presets for a channel and schedule them. Note however that Just Out will not currently execute the events, this functionality will be included in a future build.

Just Play 3.0.0.A1.863 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Devices are now stored per multi viewer layout instead of per user to prevent issues removing or adding devices.
• Updated menu keyboard shortcuts and disabled certain menu items when the inspector is disabled or the user is logged out.

Just Play 3.0.0.A1.862 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Reorganised the “View” and “Channels” menus, so that all of the items related to changing the view (e.g. Split multi viewer channel) are now in the “View” menu and all items related to configuring channels or performing actions on a channel are in the “Channels” menu.
• The “Channels” menu is now also available when a Just Play or Just Live tab is the active tab, meaning you can access the channel configuration panel from these tabs.
• Added system-standard keyboard shortcuts for entering full-screen, switching to the next and previous tab.
• The multi viewers for Just Play and Just Live channels now show the names of the currently on-air and next-up items from the first video track.
• Fixed a bug where logging out a user and logging in another user was not updating the channel configuration panel with the new user’s devices.

Just Play 3.0.0.A1.861 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed a hang requiring a Force Quit of Just Out when stopping a channel in Just Control.
• When Just Connect goes "offline" (e.g. after a crash or quit), Just Control no longer switches to the "Connecting..." screen. Instead, the individual channels show a "Disconnected" status.
• When connecting via the initial setup splash screen, selecting "Cancel" in the device setup wizard now results in Just Control quitting.
• Fixed a bug that prevented devices being removed correctly in the configuration panel.
• Groups, selection and inspector open/closed state are now stored per-user.
• Resolved a bug connecting to a device in the initial setup splash screen after entering an IP address where the entered address reverted to the previously entered value.
• There is a new "Users" tab in Just Control's preferences panel that allows use to remove users, set passwords and remove or rename multi viewer layouts.
• The initial setup splash screen now has the local IP address as the default value instead of "localhost". This is because using "localhost" can result in connection issues later connecting from remote systems.

Just Play 3.0.0.A1.860 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed a crash connecting to a channel where the channel's user had a password defined but the Just Control user did not.
• When creating a new multi-viewer layout template or logging out the current user in Just Control, any changes to the current layout template are first saved.
• There is a new preference in Just Control to automatically log in the previous user instead of showing the log in splash screen. This option is only available for users that do not have a password defined.
• Offline playout channels no longer try to connect to the channel's preview.
• When logging out the current user in Just Control, or changing the user's name, any previously entered password is now cleared.
• During log in and device configuration, the inspector is disabled and cannot be opened. When logging out the current user, the inspector is automatically closed.
• The main window's title now shows the name of the current multi-viewer layout template.

Just Play 3.0.0.A1.859 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• This version of Just Control now supports multiple users and user switching. When you start Just Control you will see a log-in screen allowing you to enter username, an optional password and a layout template. By default, the username will be the currently logged macOS user. The username and password you enter here will be used when connecting to any playout channels, so they should match one of the users defined in the channel's "Users" configuration. Once you have logged in (and assuming you have previously logged in as this user) you will see the selected multi-viewer layout. The "Just Control" menu has an additional "Log Out ..." menu item that will disconnect all channels and devices and return you to the log-in screen where you can select a different user, or the same user with a different layout template. The "Channels" menu now includes a "New Multi-viewer Layout Template" menu item that allows you to duplicate the current layout template with a new name. Any changes to this layout (e.g. split or join channels, connect new channels) will be made to this new template, so logging out and selecting the previous layout template will return you to the previous layout. This allows you to create different layouts that you can quickly switch between depending on your current job.
• Fixed a bug that allowed invalid timecodes to be entered for channels using 59.94 drop-frame timecode.
• The "Remove" button in the device configuration panel is now disabled whenever the "Remove" action cannot be executed.
• Fixed a crash after removing a device.
• It is no longer possible to create groups with "mixed" (e.g. ingest and playout) channels, or add channels of a different type to existing groups. Groups may only contain channels of the same type.
• The group "action" buttons at the bottom right of the inspector now adjust automatically to show the correct buttons for the type of channels in the selected group. When no group is currently selected, the action buttons are now hidden.
• By default playout channels now have an "open schedule interface" action button instead of double-clicking the viewer. Holding the "alt" key over the action button changes it to the "play next" action button. Both of these actions can be used when multiple channels are selected.
• If a playout channel cannot be connected (e.g. wrong user/password), the channel is marked with a status label and a "show message" action button. Clicking this button will display more detail on fixing the connection error.

Just Play 3.0.0.A1.858 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed a crash in Just Connect after stopping a channel in order to make changes.
• Added a timecode overlay to the "up next" poster-frame view at the top-right of Just Play's tab. This timecode shows the remaining time until the "up next" item will be on-air.
• The "import/export rundown" feature previously available in Just Connect has now been added to Just Control. This allows you to export a rundown for an entire day and then re-import it for a given day or even several days.
• The "!" workbench column in Just Play's tab now shows the correct icon, either for items that were ended early by clicking on "jump to next", or items that define a sync-point.
• Resolved an issue with graphic template colour properties that meant that the colour couldn't be changed. Now the colour panel is displayed when clicking the colour in the inspector allowing the colour to be changed.
• When starting Just Control for the first time, a new "splash screen" is displayed allowing you to connect to your "device" (in this case Just Connect). Once connected, the setup wizard is automatically displayed.

Just Play 3.0.0.A1.857 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• The "Show Movie Trimmer" menu item now uses the cmd-T keyboard shortcut, and the live:cut "Create Template" menu item now uses cmd-alt-T.
• The unused "operation mode" pop-down menu is now hidden when selecting a playout channel in the multi-viewer.
• Improved the visual alignment for "closed" playlists in the workbench.
• Added a new indicator icon when the mouse enters one of the buttons next to the previews (e.g. time-code or audio bars selection buttons).

Just Play 3.0.0.A1.856 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• The Just Connect and Just Out applications are now correctly "signed", meaning that Gatekeeper should allow you to open them.
• Reduced the size at which the audio bars "scale" is removed to allow for the scales to be shown for the previews in Just Play and Just Live.
• Revised keyboard shortcuts for showing/hiding the library and inspector views in Just Play and Just Live tabs to make them consistent with the multi-viewer shortcuts.
• When switching between the multi-viewer and Just Play or Just Live tabs, the settings for the preview's audio bars are now correctly remembered and restored.

Just Play 3.0.0.A1.855 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Fixed a graphical glitch around the corners of playlists in the timeline.
• Added preview settings (quality, frame-rate etc.) to the playout channel configuration settings.
• After quitting and restarting Just Control, the previously selected timecode and audio bars modes are correctly restored in each channel's tab.
• Added a current selection marker to the item colour property in the inspector.
• When dragging and dropping items directly to the workbench, the colour property is correctly added and also set to the item's currently tag colour if set.
• Added keyboard shortcuts to toggle the library, inspector and movie trimmer.
• It is now only possible to drag a playlist in the calendar view after clicking on its "title bar" with the name. Clicking on the body of the playlist no longer changes the playlist's start time.

Just Play 3.0.0.A1.854 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• When "Dual Timecode" is enabled for a channel in the multi-viewer, the correct elapsed and remaining timecodes are displayed for the current on-air clip. In all other modes the master timecode is displayed. This matches the dual timecodes shown in Just Play's tab.
• This build has changes related to Just Live.

Just Play 3.0.0.A1.853 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• When "Dual Timecode" is enabled for a channel in the multi-viewer, the correct elapsed and remaining timecodes are displayed for the current on-air clip. In all other modes the master timecode is displayed. This matches the dual timecodes shown in Just Play's tab.
• The viewer now displays a "jump to next" action button, allowing you to jump to the next clip scheduled in the multi-viewer.
• If the playing clip has closed captions, the captions are now correctly passed to the output device.
• Fixed issues that resulted in crashes when using a Blackmagic video output device.
• The average temperature of the system running Just Out is now displayed in Just Play's tab.

Just Play 3.0.0.A1.852 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Memory is now purged of older schedules each day (both Just Control and Just Connect) in order to keep memory usage from rising.
• The internal "render guard" setting used to prevent performance issues related to rendering graphics is now linked directly to the size of the pipeline buffer.
• Removed the "Don't show again" checkbox from Just Out's quit alert.
• Fixed a bug that caused Just Out to enter a "frozen" state when trying to quit with the diagnostics window closed.
• Fixed a bug that resulted in the wrong status being shown for a channel's engines after stopping a channel, quitting Just Out and restarting the channel.

Just Play 3.0.0.A1.851 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.
• Added support for the 2018 Mac Mini, macOS 10.15 and the Intel UHD Graphics 630 to the TOA System Checker.
• Fixed a bug that resulted in Just Out engines not being correctly started after stopping and restarting a channel.
• Fixed an occasional crash in Just Connect after stopping a channel.

Just Play 3.0.0.A1.850 Release Notes

• This early alpha release of Just Play 3.0 contains missing and incomplete features and is only intended for testing and should not be used for production purposes.